La Crosse Technology WS-7213U instruction manual Battery Cover

Page 38

1.Remove the battery cover on the backside. To do this, push up and pull out.

2.Observing the correct polarity, install 2 AA batteries.

Battery Cover

3.Replace battery cover.

4.Wait 5-6 minutes or until both indoor and outdoor temperatures are shown on the Indoor Temperature Station.

5.The Temperature

Station should now show: “-:- -” in the TIME LCD, and temperatures in the INDOOR and

OUTDOOR LCD’s.

4

Image 38
Contents WS-7213U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Quick Setup Do not Press ANY Buttons for 15 MinutesPage Page Press and release the SET button once more and you are done Battery Indoor Weather Station II. Setting the Time Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Weather Forecast Page Page Adding Additional Remote TEMP/HUMIDITY Sensors Optional Page Viewing and Operating With Multiple Remote Sensor Units Page Mounting Remote TEMP/HUMIDITY Sensor Weather Station Troubleshooting SolutionPage Page Maintenance and Care Instructions Specifications Measuring Range TemperatureRecommended Page Page Support@lacrossetechnology.com FCC Disclaimer WS-7034U Wireless 433 MHz Temperature Station Topic Philips screwdriver Fresh AAA 1.5V batteries Quick Setup Detailed Setup Guide Battery Installation Battery Cover II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Page Page Mounting Remote Control Sender Temperature StationProblem The LCD is faint Solution Maintenance and Care Instructions Measuring Temperatures Temperature check Page Page Support@lacrossetechnology.com FCC Disclaimer