ENGLISH
Basic operation
Getting
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control 
BUTTON
Button only on the main unit 
<BUTTON>
Button only on the remote control 
[BUTTON]
Power indicator
<ON/STANDBY> <DISC/INPUT>
[POWER]
This chapter explains the procedures required to playback a CD, and the various operations that can be performed during CD playback.
For other operations, see the sections below.
nPlayback of MP3, WMA and AAC files (vpage 15) n Playback iPod® (vpage 17)
n Playing a USB memory device (vpage 18) n Performing menu settings (vpage 20)
Before use
Set the power to standby
Press <ON/STANDBY> or [POWER].
Power is set to standby and the power indicator lights.
Before setting power to standby, make sure the disc tray is completely closed.
NOTE
•Do not force the tray in by hand while power is set to standby. This could cause a trouble.
•Even when power is set to standby, electrical current passes through some circuits. If you do not intend to use the unit for an extended period of time, unplug the power cord from the household power outlet.
Switching the input source
This unit supports the following playback functions in addition to disc playback.
•Playing files from USB memory from the front panel USB port.
•Playing iPod files from the front panel USB port.
Before playing back files from a connected device, perform the following operation to switch the input source.
Press <DISC/INPUT> to select the input source.
The input source changes in the following order each time <DISC/ INPUT> is pressed.
Disc 
USB
GSelectable itemsH
Disc Playback the disc inside the disc tray (vpage 9).
USB Playback files on the device connected to the front panel USB port (iPod/USB) (vpage 17,18).
started Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index
8