Marantz CD6004 owner manual NnButtons that can be used when playing back from an iPod

Page 29

nnFile Info (File information display selection)

When [TEXT] is pressed while playing iPod files on the unit, file

information is shown on the display.

Here, you can set which information is displayed first when [TEXT] is pressed.

1 Select “iPod Setup=>” using [8] and [9], and press [ENTER].

2 Select “File info=>” using [8] and [9], and press [ENTER].

3 Select the information you want to display first using [8] and [9], and press [ENTER].

GSelectable itemsH

1 Title The track name is displayed.

2 Artist The artist name is displayed.

3 Album The album name is displayed.

4 Time The time information is displayed.

4 Press [MENU].

The settings are saved, and the display returns to normal.

NOTE

When “iPod Ctrl=>” is set to “1 Direct”, the display order of file information cannot be changed.

nnButtons that can be used when playing back from an iPod

Remote control

Operation on the unit

buttons

 

1Plays the track

3Pause

2Return to the first track in the folder

8, 9

Skip to previous or next track

Fast forward and rewind cannot be used

 

REPEAT

Switches the repeat function

RANDOM

Switches the shuffle function

AMS

Plays the first approximately 10 seconds of

the track, then skips to the next track

 

TEXT

Switches the display

nniPod Ctrl (Operating an iPod with its own controls)

You can set whether to perform iPod operations using the iPod controls, or using the unit remote control.

1 Select “iPod Setup=>” using [8] and [9], and press [ENTER].

2 Select “iPod Ctrl=>” using [8] and [9], and press [ENTER].

3 Select the device you want to operate using [8] and [9], and press [ENTER].

GSelectable itemsH

1 Direct In this mode, the iPod controls are operated directly

while looking at the iPod display screen.

2 Remote In this mode, the iPod is operated while the iPod

information is shown on the unit display.

Display mode

 

1 Direct

 

 

2 Remote

 

 

 

 

 

 

 

 

 

Display location

 

iPod display

 

Unit display

 

 

 

 

 

 

 

 

Playable

Audio file

 

S

 

S

files

Video file

 

Sz

 

A

Active

Remote control

 

S

 

S

and this unit

 

 

buttons

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iPod

 

S

 

A

zzOnly audio is played back.

For details on how to playback when “2 Remote” is set, see “Database (iPod database selection)” (vpage 25).

4 Press [MENU].

The settings are saved, and the display returns to normal.

When “1 Direct” is set, playback, pause, skip and stop can be performed using the unit remote control.

NOTE

1st generation iPod nano or iPod with Video do not support “1 Direct”. When a 1st generation iPod nano or iPod with Video is connected, the mode automatically switches to “2 Remote”.

ENGLISH

Performing menu settings

nnResume (Resume playback settings)

You can set whether to record the place where playback is stopped. When resume playback is set to on, this unit starts iPod playback from the start of the file that was previously being played.

1 Select “iPod Setup=>” using [8] and [9], and press [ENTER].

2 Select “Resume=>” using [8] and [9], and press [ENTER].

3 Select “1 Off” or “2 On” for the resume playback settings using [8] and [9], and press [ENTER].

GSelectable itemsH

1 Off Resume playback is not set.

2 On Resume playback is set.

4 Press [MENU].

The settings are saved, and the display returns to normal.

NOTE

Resume playback cannot be used if 2 is pressed to stop the iPod. Press 3 to pause the track. Even if the input source is changed or the unit power is switched off, when the iPod is played again, playback starts from the start of the track that was previously being played back.

Getting started Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index

26

Image 29
Contents CD6004 For Canadian customers NSAFETY PrecautionsAvertissements Advertencias Getting started ContentsAbout this manual AccessoriesMain features Discs playable on this unit DiscsLoading discs Holding discsCleaning discs About the remote controlOperating range of the remote control Inserting the batteriesDisplay Part names and functionsFront panel WDIGITAL Audio OUT Coaxial connector Rear panel Remote controlEDIGITAL Audio OUT Optical connector Q0Track skip buttons 8Connecting cables Connecting the power cordBasic connections PreparationsSet the power to standby Switching the input sourceBasic operation Before usePlaying CDs Playback CDsChanging the brightness of the display To change time displayDisplaying CD-TEXT Listening with headphonePlaying repeatedly Repeat playback Cancelling all programmed tracks Canceling a track from program playbackPlaying tracks in a specific order Program playback Checking the program detailsTurning digital output off Switching Audio EXRewinding tracks slightly to listen again Quick replay Advanced connections Connecting the flasher input jackDigital connection Digital audio outputNnSetting Remote control connectionNnSupported iPod Models NnConnectionPlayable MP3, WMA and AAC formats Advanced operationsNWriting software format NFile formatsMP3, WMA or AAC playback order of MP3, WMA or AAC files Playing MP3, WMA and AAC filesSelecting the operating mode Buttons that can be used when playing back from an iPodPlayback iPod Playing an iPodPlayable USB memory formats Disconnecting the iPodPlaying a USB memory device Playing files stored on USB memory devices To switch the folder or file during playbackFast-forwarding and fast-reversing Searching Playing repeatedly Repeat playbackCD D-OUT CD digital output settings Performing menu settingsUSB OUT USB audio output settings Removing the USB memory deviceUSB/iPod= Timer Play Timer play settingPlays back the Disc media NnQ Replay Quick replay NnFile Info File information display selectionNnRange Spec Playback range selection NFile Info File information display selection USB Setup USB memory device operationNnResume Resume playback settings NDatabase iPod database selection IPod Setup iPod operationDisplay mode Direct Remote NnButtons that can be used when playing back from an iPodAuto STB Auto standby function Explanation of termsMP3 Mpeg AudioPlayer Sampling frequencyProblem Cause Corrective action TroubleshootingGDiscH Problem Cause Corrective action GDisplayH ProblemNn Audio performance SpecificationsVvA IndexPage Kg 14 lbs 8.8 oz Unit inch mm