Marantz CD6004 owner manual Specifications, Nn Audio performance

ENGLISH

Problem			Cause	Corrective action		Page
Sound cannot be heard			• Models prior to 5th generation	• For details, see “Supported	14
even when an iPod is			iPods are not supported.	iPod Models”.
connected.			• The amplifier and speakers are	• Connect the cables correctly.	14
			not connected correctly.	(See the instruction manual
				for the amplifier.)
			• The amplifier’s function or	• Switch the amplifier’s		–
			selector switch is not set to	function or selector switch
			“CD” or “AUX” or such (to	to “CD” or “AUX” or such
			whatever you have connected	(to whatever you have
			this unit to).	connected this unit to).
				(See the instruction manual
				for the amplifier.)
			• The amplifier’s volume control	• Adjust the amplifier volume.		–
			is set at the minimum level.	(See the instruction manual
				for the amplifier.)
It takes time for USB			• When connecting a high-	• Wait until reading is		–
memory device	to	be	capacity USB memory device,	completed.
read.			it will take time to read
			depending on its capacity.
			Several minutes may be
			required for reading when
			using a high-capacity device.
There is no sound output			• The “USB OUT” setting is set	• Change the “USB OUT”	20
from this unit when			to “2 Digital”.	setting to “1 Analog”.
music files stored	on	a
USB memory device or
iPod are played.
GRemote controlH
Problem			Cause	Corrective action		Page
Remote control			• The distance between this unit	• Move closer to this unit, and		4
operation is not			and the remote control is too	operate the remote control
possible.			great.	within the operating range.
			• There is an obstacle between	• Remove the obstacle.		4
			this unit and the remote
			control.
			• The remote control’s batteries	• Replace all batteries with		4
			are dead.	new ones.
			• The remote control sensor is	• Move so that the remote		4
			being subjected to strong light.	control sensor is not
				subjected to strong light.
			• The switch on the back of the	• When using this unit		14
			REMOTE CONTROL is on	independently, set the
			“EXTERNAL”.	switch to “INTERNAL”.

Specifications

nn Audio performance

• Analog output
Channels:	2 channels
Playable frequency range:	2 Hz – 20 kHz
Playable frequency response:	2 Hz – 20 kHz
S/N:	110 dB
Dynamic range:	100 dB
Harmonic distortion:	0.002 % (1 kHz)
Wow & flutter:	Crystal accuracy
• Output level
Signal type:	2.2 V RMS stereo
Headphone output:	28 mW/32 Ω (variable maximum)
• Digital output
output level (cinch JACK):	0.5 Vp-p (75 Ω)
output level (optical):	-19 dBm
• Optical Readout System
Laser:	AlGaAs
Wave length:	780 nm
Signal type:	16-bit linear PCM
Sampling frequency:	44.1 kHz
nn General
Power supply:	AC 120 V, 60 Hz
Power consumption:	32 W
	Standby: 0.3 W or less
Operating temperatures:	+5 ˚C – +35 ˚C
Operating humidity:	5 – 90 % (without dew)

zzFor purposes of improvement, specifications and design are subject to change without notice.

29