Panasonic SC-AK210 manual Turning the demo function off, Convenient functions, Auto-off function

Turning the demo function off

A demonstration of the display is shown if you have not set the clock. You can reduce the power consumed in standby mode by turning it off.

During standby mode

Hold down [-DISP/–DEMO] until “NO DEMO” is displayed.

Every time you hold down the button:

NO DEMO (off) ↔ DEMO ON (on)

To show a demonstration of the display

Hold down [-DISP/–DEMO] until “DEMO ON” is displayed.

Note

DEMO function cannot be turned on when Dimmer is on.

Convenient functions

SLEEP	CLOCK	PLAY
AUTO OFF	TIMER	REC

DISC
1	2	3
PROGRAM
4	5	6
S.SOUND EQ
7	8	9
PRESET EQ
	0	10
	CD
TUNER		TAPE
BAND

AUX

VOL VOL

MUTING REW CLEAR FF

CD DISP DIMMER PLAY MODE

To dim the display panel

Remote control only

Press [DIMMER].

The display is dimmed and the indicator is turned off. (The AC supply indicator remains on.)

Press [DIMMER] again to restore the display.

Switching displays ( SC-AK310and SC-AK210 only)

Press [-DISP/–DEMO] to select the desired spectrum analyzer.

Every time you press the button:

Normal Peak hold Aurora

(OFF)

To mute the volume

Remote control only

Press [MUTING].

Press the button again to cancel. “MUTING” goes out.

To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise it to the required level.

Muting is also cancelled when the unit is turned off.

Auto-off function

Remote control only

	SLEEP CLOCK	PLAY
SLEEP	AUTO OFF TIMER	REC
–AUTO OFF	DISC

1	2	3
PROGRAM
4	5	6
S.SOUND EQ
7	8	9

PRESET EQ

0 10

CD

TUNERTAPE

BAND

AUX

VOL VOL

MUTING REW CLEAR	FF
CD DISP DIMMER PLAY MODE

When CD or tape is selected as the source

To save power, the unit turns off if it is left unused for ten minutes. This function does not work if the source is tuner or AUX.

Hold down [–AUTO OFF].

“AUTO OFF” is shown on the display.

The setting is maintained even if the unit is turned off.

If you select tuner or AUX as the source, “AUTO OFF” goes out. It comes on again when you select CD or tape.

To cancel

Hold down [–AUTO OFF] again.

Setting the time

Remote control only

SLEEP	CLOCK	PLAY
AUTO OFF	TIMER	REC

DISC
1	2	3
PROGRAM
4	5	6
S.SOUND EQ

7 8 9

PRESET EQ

0 10

CD

TUNERTAPE

BAND

AUX

VOL VOL

MUTING REW	CLEAR	FF
CD DISP DIMMER PLAY MODE

This is a 24-hour clock.

1Switch on the unit.

2Press [CLOCK/TIMER] to select “CLOCK”.

Every time you press the button:

CLOCK PLAY REC

Previous display

3(within 7 seconds or so)

Press [ g, REW/3] or [f, 4/FF] to set the time.

4Press [CLOCK/TIMER] to finish setting the time.

The display will return to whatever was displayed before you set the time.

To display the time

Press [CLOCK/TIMER] once when the unit is on or at standby mode. The time is shown for about 5 seconds.

Note	13
Reset the clock regularly to maintain accuracy.

RQT6713