Video Settings, Audio Settings

VIDEO SETTINGS

1Press the SETUP button.

• The setup screen will appear.	SETUP
• The setup screen will appear.	1. LANGUAGE
	2. VIDEO
	3. AUDIO
	4. LOCK
	5. OTHERS
	Enter	/	Exit

2Press the K/L or number buttons to select

VIDEO, and then press the ENTER button.

SETUP/VIDEO

1. TV MODE	[4:3LB]
2. STILL MODE	[AUTO]

Enter, Back Exit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

AUDIO SETTINGS

1 Press the SETUP button.

SETUP

1. LANGUAGE

• The setup screen will appear. 2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter

Exit

2Press the K/L or number buttons to select

AUDIO, and then press the

ENTER button.	SETUP/AUDIO
ENTER button.	1. DIGITAL OUT
	1. DIGITAL OUT
	2. VIRTUAL 3D	[OFF]
	Enter,	Back	Exit

3Press the K/L or number buttons to select an item, and then press the ENTER button.

	SETUP/AUDIO		• Sets the sample rate for playing a disc recorded
	DIGITAL OUT		with high sound quality.

1.	PCM	[48kHz]
			• When a Dolby Digital decoder is connected.
2.	DOLBY DIGITAL [OFF]

SETUP/VIDEO

TV MODE

1. 4:3 PAN&SCAN

2. 4:3 LETTER BOX

3. 16:9 WIDE

Enter, Back Exit

SETUP/VIDEO

STILL MODE

1. AUTO

2.FIELD

3.FRAME

Enter,Back Exit

•Full-height pictures are shown with one or both sides trimmed.

•Wide screen (full-width) pictures are shown with black bars at top and bottom.

•This is not available for TV/DVD.

•AUTO is normally selected.

•If pictures are blurred in auto mode.

•For showing motionless pictures at high resolution in still mode.

3. DTS	[OFF]	• When a DTS decoder is connected.
		• When a DTS decoder is connected.
Enter,	Back	Exit

SETUP/AUDIO

VIRTUAL 3D

1.OFF

2.ON • To activate the 3D effect.

Enter,Back Exit

4 Press the K/L or number buttons to select the

desired item, and then press the ENTER but-

ton.

4	Press the K/L or number buttons to select the
	desired item, and then press the ENTER but-
	ton.

5	Press the SETUP button.

• If PCM, DOLBY DIGITAL or DTS is selected on

the DIGITAL OUT setting screen, press the K/L or

number buttons again to select a further item, and

then press the ENTER button.

• The setup mode will be canceled and the ordinary

screen will appear.

NOTE:

•If the number buttons are used in steps 2 to 4, the settings are immediately selected. (You do not need to press the ENTER button.)

SETUP/AUDIO

PCM

1.48kHz

2.96kHz

Enter,Back Exit

•Audio signals are converted to 48 kHz/16 bit signals for digital output when playing a DVD recorded with high sound quality (48 kHz/ 20 bit/24 bit, 96 kHz).

•Sound is reproduced at the high quality of

96 kHz when playing a DVD recorded with high sound quality (48 kHz/20 bit/24 bit, 96 kHz). For 48 kHz discs or when 4:3 LETTER BOX is selected in TV MODE, sound is reproduced at 48 kHz.

SETUP/AUDIO

DOLBY DIGITAL

1.OFF

2.ON • When a Dolby Digital decoder built-in amplifier