Emerson EWC19DA Playing a Disc, Playing a DVD Video Or AN Audio CD, Using the DVD Menus, Dvd Cd

Models: EWC19DA

1 44
Download 44 pages 35.93 Kb
Page 21
Image 21

PLAYING A DISC

Getting started

1

Turn on the power of the amplifier and any other com- ponents which are connected to the TV/DVD. (Change the input system to suit the TV/DVD, and check that the sound volume is correct.)

2Press the POWER button.

The power will turn on.

3Press the SELECT button on the remote con- trol until "DVD" appears on the screen.

Then press the DVD button.

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

1Press the OPEN/CLOSE button.

The disc loading tray will open.

2Place a disc into the tray.

Make sure the disc is sitting properly in the correct recess, with the label side up.

3Press the PLAY button.

The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

When you play back the DVD which a title menu is recorded, the menu may appear on the screen. In this case, refer to "USING THE TITLE MENU".

4Press the STOP button to stop play.

NOTES:

A "prohibited icon" may appear at the bottom right on the TV screen during operation, warning

that a prohibited operation has been encountered by the TV/DVD or the disc.

If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

With DVDs that use some titles for playback pro- gram signals, playback may start from the second title, or it may skip these titles.

Suppose that the TV/DVD is shut off or in any other mode than DVD. Press the PLAY or OPEN/CLOSE button on the TV/DVD, and the TV/DVD will be in the DVD mode to play DVD’s.

To run the DVD player, press the PLAY or OPEN/CLOSE button.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the MENU button.

The DVD menu will appear.

2Select the desired title.

Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

- 21 -

EN

0I04

Page 21
Image 21
Emerson EWC19DA owner manual Playing a Disc, Playing a DVD Video Or AN Audio CD, Using the DVD Menus, Dvd Cd