JVC RS-WP1WT manual Connecting the AC Adaptor Cord, How To Operate the System on Batteries

Page 8

Connecting the AC Adaptor Cord

Firmly insert the supplied AC adaptor cord into the DC IN jack on the back of the System.

12V

AC adaptor cord

DC IN

 

To wall outlet

Note:

This Unit may generate noise depending on the positioning of the AC adaptor.

Place the Unit and AC adaptor as shown in the figure.

CAUTIONS:

•ONLY USE THE JVC AC ADAPTOR PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.

•BE SURE TO UNPLUG THE AC ADAPTOR FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.

Now you can plug the AC adaptor into the wall outlet, and your System is at your command!!

How To Operate the System on Batteries

You can operate the System on 8 batteries.

1.Open the battery cover on the back of the System by pulling it toward you while pressing the tab.

2.Put 8 batteries (not supplied) in the battery compartment.

• Match the polarity (+ and –) on the batteries with the + and – marking in the battery compartment.

3.Securely close the battery cover while pressing the tab.

English

“R20/D (13F)” size batteries

Notes:

•When you operate the System on AC power or car battery (DC12V), the power source automatically switches from batteries to AC or DC12V. However, you should remove the 8 batteries when operating on AC power or car battery (DC12V).

•When the batteries are exhausted, mistracking will occur during CD playback or sound will be distorted intermittently during tape playback. You need to replace the batteries at a time.

•It is recommended that the AC adaptor be used when recording important material or listening to a CD.

•When inserting batteries in the System, lay it on a soft surface so as not to damage it and facilitate insertion.

CAUTION: Handle batteries properly.

To avoid battery leakage or explosion:

•Remove 8 batteries when the System will not be used for a long time.

•When you need to replace the batteries, replace all batteries at the same time with new ones.

•Don’t use an old battery with new ones.

•Don’t use different types of batteries together.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents RS-WP1WT Model No Serial NoMises en garde, précautions et indications diverses For U.S.AEnglish Français Remarques Table of Contents Accessories How To Carry the SystemStrap length by adjusting Getting StartedHow To Put Batteries In the Remote Control Using the Remote ControlConnecting Auxiliary Equipment Batteries are not supplied with this systemConnecting the AC Adaptor Cord How To Operate the System on BatteriesSecurely close the battery cover while pressing the tab To wall outletHow To Operate the System on Car Battery DC12V On the Unit On the Remote ControlAttaching the removed door To car’s cigarette lighter socket DC12VTurning the Power On and Off Auto Power OFF functionBasic Operations Turning the System OnAdjusting the Volume Active Hyper Bass ProTone Control BASS/TREBLE Showing the Time DisplayOne Touch Radio Using the TunerTuning In a Station Presetting Stations Manual PresettingAuto Presetting Press the 4 or ¢ button to tune in a stationUsing the CD Player Setting a CDBasics of Using CD Player-Normal Play P. Anti-Shock ProtectionRepeating Tracks Programming Playing Order of the TracksRandom Play Using the Cassette Deck Listening to a Tape Reverse ModeRegular Play One Touch PlayUsing the Cassette Deck Recording CD 6 Reverse ModeStandard Recording Forward recordingOne Track Recording CD Direct RecordingRecording an AM station to tape Set the volume level to minimum Press the AUX button Listening to an Auxiliary EquipmentListening to Auxiliary Equipment AUXSetting the Timer Using the TimersSetting the Clock Setting the Sleep Timer Care And Maintenance Troubleshooting SymptomPossible Cause ActionSpecifications 0201SKMWSTJEM
Top Page Image Contents