Using the Timers
English
TIMER CLOCK
DOWN UP
| TIMER |
CLOCK | TIMER ON/OFF STAND BY/ON |
|
|
| SLEEP |
DOWN | UP | SET |
|
|
|
| PROGRAM |
|
|
| RANDOM |
|
| AUTO |
|
|
| PRESET | REPEAT |
AUX | C D | TAPE | TUNER |
BAND | |||
|
|
| FM MODE |
REVERSEMODE | REW | MULTI CONTROL | FF |
DISPLAY
BASS/
TREBLE
AHB PRO
VOLUME
TIMER ON/OFF SET
SLEEP
ON time/OFF time indicator
TIMER indicator |
|
|
|
|
|
|
|
|
|
| SLEEP indicator |
TIMER REC |
|
|
|
|
|
|
|
| CLOCK indicator | ||
indicator |
|
|
|
|
|
|
|
|
|
| |
REC | ONOFF SLEEP CLOCK |
ON time, OFF time, Source, Volume
When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
The timers let you control listening and recording functions automatically.
Setting the Clock
When you supply the power using one of the following ways, the “CLOCK” indicator blinks and “AM12:00” appears on the display. You need to set the clock.
•Plugging the AC adaptor into the wall outlet
•Loading 8 batteries into the Unit
•Connecting car battery (DC12V)
Use the Remote Control to set the clock.
Notes:
•The clock must be correctly set for the timers to work.
•The procedure must be completed within two minutes. Otherwise, the setting is cleared and must be repeated from the beginning.
CLOCK
DOWN | UP | SET |
1.Turn on the System.
2.Press the CLOCK button on the Remote Control.
The time indication blinks on the display.
3.Press the UP or DOWN button to set the time.
Press the UP or DOWN button to increase or decrease the time. Pressing and holding the button will change the time rapidly.
4.Press the SET button.
The selected time is set and the seconds start counting from 0. Then, the display returns to the original one.
CAUTION: If no battery is loaded in the unit and it left with the AC adaptor unplugged (or when there is a power failure) for more than 5 minutes, CLOCK indicator will blink on the display. Set the current time (clock) again.
Setting the Timer
Once you have set the Timer, the timer will be activated at the same time every day, except for the Tuner REC timer which is used to record a broadcast on the tape. It can be cancelled and reactivated whenever you wish.
The Timer indicator ( ) on the display shows when the Timer you have set is in effect.
Use the Remote Control to set the Timer.
Note:
Perform each setting within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.
1.Turn on the System.
2.Setting the ON time (Example: AM11:15).
1.Press the TIMER button on the Remote Control.
The Timer indicator ( ) and “ON” indicator light up and the current ON time blinks on the display.
ON
2.Set the ON time by pressing the UP or DOWN button. Pressing and holding the button will change the time rapidly.
ON
3.Press the SET button.
The current OFF time blinks on the display.
OFF
(To be continued on the next page)
17