Presetting Stations, Manual Presetting

English

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM stations.

Note:

Preset numbers may have been set to factory test frequencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below:

Manual Presetting

1.Select a band (either AM or FM/FM-MONO) by pressing the TUNER BAND button.

TUNER

BAND

FM MODE

2. Press the 4 or ¢ button to tune in a station.

REW MULTI CONTROL FF

3.Press the number key for more than 3 seconds to store in memory for the desired preset number.

The preset number blinks for four seconds and then the preset station for the preset number appears.

Example: To preset the tuned station to the preset number 15, press +10 then 5 for more than 3 seconds. The display changes as follows.

(Tuned station)

(For 3 seconds)

4.Repeat above steps 1 to 3 for each station you want to store in memory with a preset number. To change the preset stations, repeat the same steps as above to overwrite a new station.

Auto Presetting —————————

In each band, you can automatically preset FM-30, AM-15 stations. Preset numbers will be allocated as stations are found, starting from the lowest station and moving up the frequency.

1. Select a band (either AM or FM/FM-MONO) by pressing the TUNER BAND button.

TUNER

BAND

FM MODE

2. Press the AUTO PRESET button on the Remote Control for more than 2 seconds.

AUTO

PRESET

(For 2 seconds)

3. Repeat steps 1 and 2 for the other band.

■If you want to change the preset stations, carry out the Manual Presetting for the desired preset numbers.

CAUTION: If no battery is loaded in the unit and it left with the AC adaptor unplugged (or when there is a power failure) for more than 24 hours, preset stations will be eliminated. Store all stations again after connecting the AC adaptor cord (or after electric power failure restores).