JVC RS-WP1WT manual Adjusting the Volume, Active Hyper Bass Pro, Tone Control BASS/TREBLE

Page 11

English

Adjusting the Volume

You can adjust the volume level between 0 and 50.

Press the VOLUME + button to increase the volume or press the VOLUME – button to decrease it.

When you keep pressed the VOLUME + or – button, the volume changes rapidly.

CAUTION: DO NOT start playing any source without first setting the volume to minimum, as a sudden blast of sound can damage your hearing, speakers and/or headphones.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.

Be sure to turn down the volume before connecting or putting on headphones.

Note:

Do not pull the headphone cord with a strong force when headphones are connected to the System. Otherwise, the System may fall down.

Active Hyper Bass Pro

You can enhance the bass level. You can use this effect only for playback.

Press the AHB PRO button on the Remote Control.

Each time you press the button, the display changes as follows: BASS 1 BASS 2 OFF (back to the beginning) BASS indicator appears on the display.

Tone Control (BASS/TREBLE)

You can control the tone by changing the bass and the treble between –5 and +5. (0: Flat)

1.Press the BASS/TREBLE button on the Remote Control to select BASS or TREBLE.

Each time you press the button, the display changes as follows:

BASS TREBLE Current sound source (back to the beginning)

2.Press the VOLUME + or VOLUME – button within five seconds to adjust the bass or treble level.

BASS/

TREBLE

VOLUME

(Within 5 seconds)

Showing the Time (DISPLAY)

In Standby mode, the backlight of the display goes out, and the “CLOCK” indicator and the current time (clock) appear on the display.

While the power is turned on, you can see the current time (clock) at any time, as follows:

Press the DISPLAY button on the Remote Control.

Each time you press the button, the display changes as follows:

Current sound source (e.g. FM103.5 MHz) Clock (back to the beginning)

Note:

To let work the clock, you need to set the clock first. (See “Setting the Clock” on page 17.)

8

Image 11
Contents Model No Serial No RS-WP1WTFor U.S.A Mises en garde, précautions et indications diversesEnglish Français Remarques Table of Contents Getting Started AccessoriesHow To Carry the System Strap length by adjustingBatteries are not supplied with this system How To Put Batteries In the Remote ControlUsing the Remote Control Connecting Auxiliary EquipmentTo wall outlet Connecting the AC Adaptor CordHow To Operate the System on Batteries Securely close the battery cover while pressing the tabTo car’s cigarette lighter socket DC12V How To Operate the System on Car Battery DC12VOn the Unit On the Remote Control Attaching the removed doorTurning the System On Turning the Power On and OffAuto Power OFF function Basic OperationsShowing the Time Display Adjusting the VolumeActive Hyper Bass Pro Tone Control BASS/TREBLEOne Touch Radio Using the TunerTuning In a Station Press the 4 or ¢ button to tune in a station Presetting StationsManual Presetting Auto PresettingP. Anti-Shock Protection Using the CD PlayerSetting a CD Basics of Using CD Player-Normal PlayRepeating Tracks Programming Playing Order of the TracksRandom Play One Touch Play Using the Cassette Deck Listening to a TapeReverse Mode Regular PlayForward recording Using the Cassette Deck RecordingCD 6 Reverse Mode Standard RecordingOne Track Recording CD Direct RecordingRecording an AM station to tape AUX Set the volume level to minimum Press the AUX buttonListening to an Auxiliary Equipment Listening to Auxiliary EquipmentSetting the Timer Using the TimersSetting the Clock Setting the Sleep Timer Care And Maintenance Action TroubleshootingSymptom Possible CauseSpecifications 0201SKMWSTJEM