Custom name

Custom name allows the user to personalize the name/label for the cordless handset. In a multi-handset environment, this is an ideal option to

personalize each handset to its user or extension number.

IP Phone UI

1.Press Â.

2.Navigate to Custom Name or press 4.

3.Press the Change softkey.

4.Press the Edit softkey. If a custom name already exists, the Delete softkey will be presented.

5.Using the keypad, type out a new label or use the scroll keys Ïand Âto move the cursor to the desired display position or to erase text.

6.The ChCase softkey is available to toggle between upper and lower case text entry.

7.Press the Save softkey to save the name.

8.Press the Goodbye ykey to return to the main idle screen.

Note: In editing mode, the Volume Bar can be used in place of the Ïand Âkeys to control the screen cursor. Pressing the Lower end volume bar for Backspace/ Erase; and pressing the Higher end volume bar to add a Space.

Call timer

When the call timer is enabled, the timer starts from the first call and continues until all calls have been released.

Note: The call timer is not usable for call accounting since the timer continues to increment even when the call is on hold.

Vibrate

The Vibrate option allows the handset to signal an incoming call by vibrating as well as ringing. By default, this option is always Off.

To enable this feature, press the Change softkey and the display will indicate "Vibrate On" and "-confirmed-" and will quickly return to the previous menu display.

Once the Vibrate is On, p icon is shown beside the ringer icon on the top right line of the display.

Pressing the ykey will return you to the main idle display screen.

Handset Pairing

All handsets must be paired to a 57i CT base before it can be used. Please refer to the section entitled 115.

Using Your 57i CT Cordless Handset

Model 57i CT IP Phone User Guide 101

Page 109
Image 109
Aastra Telecom 57i CT IP Phone manual Custom name, Call timer, Vibrate, Handset Pairing