Aastra Telecom 57i CT IP Phone manual Softkey Configuration Using the Aastra Web UI

•specify a customized label to display on the Phone UI

•specify a value

•specify which line to use

•specify the state of the park and/or pickup keys

On the IP phone UI, the Park/Pickup feature displays the following:

•When a call comes in, and you pickup the handset, the custom label that you configured for the Park softkey displays on the Phone UI.

•After the call is parked, the label that you configured for the Pickup soft- key displays on other phones in the network. You can then press the "Pickup" softkey, followed by the applicable value to pickup the call on another phone in your network.

You can configure a Park and Pickup programmable configuration using the Aastra Web UI.

Softkey Configuration Using the Aastra Web UI

On the 57i CT, you configure a Park and/or Pickup key at Operation- >Softkeys and XML. You enter a key label, and value for a specific line on the phone. The default state of the Park configuration is "connected". The default state of the Pickup configuration is "idle, outgoing".

Note: Applicable values depend on the server in your network (Asterisk, Broad- Works, Sylantro, ININ PBX. See the table "Park/Pickup Call Server Configu- ration Values" on page 47.

Configuring Park/Pickup using Softkey Configuration

Use the following procedure to configure the Park/Pickup call feature using the softkey configuration method.

Aastra Web UI

1.Click on Operation->Softkeys and XML.

Softkeys

Model 57i CT IP Phone User Guide 49