Aastra Telecom 57i CT IP Phone Feature Keys on the Handset, Feature Key Programming Guidelines

Feature Keys on the Handset

You can program up to 15 feature keys on the 57i CT handset with specific functions using the Aastra Web UI. The following table identifies the functions available for all 15 handset keys and the default functions for each key.

Key Function	Description	Default for:
Line 1	Line 1 key - Selects line one	Handset Key 1
Line 2	Line 2 key - Selects line two	Handset Key 2
Line 3	Line 3 key - Selects line three	Handset Key 3
Line 4	Line 4 key - Selects line four	Handset Key 4
Icom	Intercom key – Enter handset list to select	Handset Key 5
	handset to call
Dir	Directory key – Activate directory feature	Handset Key 6
Callers	Callers key – Activate callers feature	Handset Key 7
Xfer	Transfer key - Activate transfer feature	Handset Key 8
Conf	Conference key - Activate conference feature	Handset Key 9
Public	Public key – Toggle between public & private	Handset Key 10
	call mode
None	No function is selected – this key is empty, no	Handset Key 11 and
	label.	12
Line 5	Line 5 key (if available) - Selects line five.	Handset Key 13
Line 6	Line 6 key (if available) - Selects line six.	Handset Key 14
Line 7	Line 7key (if available) - Selects line seven.	Handset Key 15
Line 8	Line 8 key (if available) - Selects line eight
Line 9	Line 9 key (if available) - Selects line nine

Feature Key Programming Guidelines

The following are guidelines to use when programming the feature keys on the handset:

•All handsets paired with the same Base Station have the same pro- grammed functions since the web interface applies the functions to all the handsets paired with that base.

•A newly registered handset or handset that was out-of-range during the programming needs to perform an "off-hook and on-hook" sequence in order for the newly programmed function to be broadcasted to the affected handsets. Simply press the vkey from the idle state to go off- hook. Then, press the y key to go back on-hook.

•Duplicate functions can exist in the feature key as there is no filtering or duplicate checking done on the handset or the base.

•If no line keys are programmed for the feature key, the handset is restricted to intercom calls only.

Using Your 57i CT Cordless Handset

Model 57i CT IP Phone User Guide 103