Craftsman 320.61199 warranty Safety Rules for Charger

Page 10

Only use application accessories in good condition. Do not use them if they are torn or worn.

Do not restart a cutting operation in the workpiece. To resume a cutting operation: while keeping the tool from contacting the workpiece, allow the tool reach full speed and then carefully guide the cutting accessory into the cut.

Keep your hands away from the cutting area. Do not reach under the material being cut.

Hold power tools by their insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

hearing loss.

_lk WARNING: Wear ear protection. Exposure to noise can cause

SAFETY RULES FOR CHARGER

_L. WARNING: Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, fire, and/or serious personal injury.

_, WARNING: Before using the battery charger, read all instructions and cautionary markings in this manual and on the battery charger, the battery, and the product using the battery to prevent misuse of the products and possible injury or damage.

_, CAUTION: To reduce the risk of electric shock or damage to the charger and battery, charge only those lithium-ion rechargeable batteries specifically designated on your charger's label. Other types of batteries may burst, causing personal injury or damage.

Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.

Use of an attachment not recommended or sold by the battery-charger manufacturer may result in a risk of fire, electric shock, or injury.

Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the charger cord to disconnect the plug from receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.

Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise be subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury and damage to the cord and which could then result in electric shock.

61199 ManuaLRevised_09

0310

Page 10

Image 10
Contents Criif Mrni ONE Year Full Warranty on Craftsman Tool IntroductionSymbol Signal Meaning Symbol Name DESIGNATION/EXPLANATION Read and Save These Instructions Work Area Safety General Safety RulesElectrical Safety Personal Safety Power Tool USE and Care Battery Tool USE and Care Service Specific Safety Rules for Cordless MULTI-TOOLSafety Rules for Charger ManualRevised09 0310 IM Portant Safety Instructions Know Your MULTI-TOOL Fig.l UnpackingSelecting the Application Accessory LOW-BATTERY Capacity IndicatorPacking List When to Charge the Battery Pack Battery ProtectionCold Weather Operation HOW to Charge the Battery Pack LED Functions of Charger FigDefective Battery Charging a HOT Battery PackCharging a Cold Battery Pack Battery ChargingPack Fig To Detach BatteryON/OFF Switch Fig LED Worklight FigAdaptor Detachable VacuumAttaching the Application Tool , 9, 10 Ribs on shaft Grooves Sawing Separati NGSanding R1-,J-,Jaltaiil,i Adhesive Removal Blade Cut out the grout around tileGeneral Maintenance BatteriesBattery Pack Removal and Preparation for Recycling Problem Cause SolutionVolt LITHIUM-ION Cordless MULTI-TOOL Model Number 61199ManualRevised031009Page28 61199ManualRevised031009Page29 Your Home Our Home