SAWING | Fig. 13 |
& |
|
WARNING: | Use sharp, |
undamaged saw blades only. Deformed, blunt saw blades or saw blades that are otherwise
damaged can break.
WARNING: When sawing
light building materials, observe
the statutory provisions and
the recommendations of the material suppliers.
_, WARNING: Plunge cuts may only be applied to soft
materials, such as wood, gypsum plaster boards, etc.
_, WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
To cut and remove damaged portions of plasterboard:
Make two sets of parallel cuts on around the the damaged section. Then use a chisel (available separately) to break out the piece between the cuts.
SEPARATI NG
Fig. 14
The Carbide Circular Adhesive Removal Blade is designed to cut out the grout around wall tiles. It can also be used to cut plaster, porous concrete
and masonry.
Put the Carbide Circular Adhesive Removal Blade on the cutting surface at 90 ° to the workpiece, switch the tool on, and apply with appropriate pressure (Fig. 14).
NOTE: When separating wall
tiles, take into consideration that the application tools/accessories wear heavily when used for longer periods of time.
61199 | Page 21 |