Craftsman 320.61199 warranty LED Functions of Charger Fig, HOW to Charge the Battery Pack

HOW TO CHARGE THE BATTERY PACK

NOTE: This Lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the battery pack.

A fully discharged battery pack will charge in about 30 minutes in an environment between 32 ° F (0° C) and 104 ° F (40 ° C).

1.Charge the Lithium-Ion battery pack with the correct charger.

2.Connect the charger to a power supply.

3.Align the raised ribs of the battery pack with the slot in the charger.

4.Insert the battery pack into the charger (Fig. 2).

5.The charger will communicate with the battery pack to evaluate the condition of the battery pack.

6.The green lights will flash while the battery pack is charging. After charging is complete, the green LED on the charger will be on. The flickering red light indicates a defective battery or a bad connection between the battery and the charger.

7.The battery pack will fully charge if left on the charger, but it will not overcharge.

NOTE: For your convenience, the charger can operate with most generators and inverters rated at 300 watts or higher.

LED FUNCTIONS OF CHARGER (Fig. 3)

LED INDICATOR			BATTERY	RED	GREEN
			PACK	LED	LED
			Hot/Cold	On	Off
_) I/LO	TEMP.	_]	battery
(SEE	MANUAL)
BATTERY			Defective	Flashing	Off
DEFECTIVE
CHARGING			Charging	Off	Flashing
BATTERY
			Fully	Off	On
FULL		_	charged
BATTERY

ACTION

Charging will begin when battery returns to 32°F (0°C)-104°F (40°C)

Battery pack or Charger/Adapter is defective

Charging

Charging is complete

61199 ManuaLRevised_09 0310 Page 16