•If any part is damaged or missing, please refer to the numbers listed on the back page of operator's manual.
PACKING LIST
SELECTING THE APPLICATION ACCESSORY
_, WARNING: If any part is broken or missing, do not attempt to plug in the power cord or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury.
ACCESSORY |
|
|
| MATERIALS |
| ||||
Carbide | Circular | Adhesive | Grout, Plaster, | Porous |
| ||||
Removal | Blade |
| Concrete | and Masonry |
| ||||
Carbide | Triangular Rasp | Hardened | adhesives, |
| |||||
|
|
|
| Thinset, | Wood, | Masonry |
| ||
Hardened | Steel | Scraping | Paint & Varnish, | Bonded |
| ||||
Blade |
|
|
| Carpet, | Soft Adhesives, | Vinyl | |||
|
|
|
| Flooring, | wood | and other | |||
|
|
|
| floor coverings. |
|
|
| ||
Steel | Circular | Wood, Plastic, Drywall, Non- | |||||||
Saw | Blade |
| Ferrous | Metals, | thin Sheet | ||||
|
|
|
| Metal and | other | materials | |||
High Carbide Steel Straight Wood, Plastic, Drywall, Soft | |||||||||
Edge | Flush Cut | Blade | Metals and | other | Materials | ||||
Sandpaper |
| plaster, | and other | surfaces, | |||||
Sanding | Plate and | Bare or | painted | wood, |
| ||||
|
|
|
| depending | on sandpaper | grit |
LOW-BATTERY CAPACITY INDICATOR
If the LED worklight the tool is depressed, should be recharged.
begins to rapidly and continuously flash when the switch on the
Unlike other battery pack types,
NOTE: The LED may also flash due to an overload or high temperature (see
61199 ManuaLRevised_09 | 0310 | Page 14 |