Listening To The Radio
1.) Press the 
Power button on the top panel or remote control to turn the system ‘On. If necessary press the Function button on the top panel or remote control to select the Tuner function.
The TUNER indicator appears and the display changes from time to radio frequency. The first time you turn your unit ‘On’the display will show FM 87.5 MHz.
2.) To switch between the FM and AM bands press the Band button on the top panel or remote control. The first time you select the AM band the display will show AM 520
KHz.
3.) Tune to the desired station with the Tuning/Skip 
or 
buttons on the top
panel or the 
/ 
buttons on the remote control as follows:
•Manual Tuning
Repeatedly press either the Tuning/Skip 
or 
buttons on the top panel or
the 
/
buttons on the remote control until the display shows the frequency of the desired station.
•Automatic Tuning
Depress and hold either the Tuning/Skip 
or 
buttons on the top panel or
the 
/ 
buttons on the remote control until the display begins to move and then release the buttons. The tuner searches up or down the band for the next strong station and then stops. Repeat this process until the tuner stops on the desired station.
20
iC200_052906.p65 | 20 |
29/5/2006, 10:29