4.) After installing the necessary adapter in the docking area and making sure that it is locked in place, mount the support bracket, and then your iPod® into the adapter so that the
If necessary set the HOLD switch on your iPod® to the “Off” position.
5.) Press the 
Power button on the top panel or remote control to turn this system ‘On’. Depending on the setting of the Back Light Timer in your iPod® the display backlighting may turn ‘On’and the “Charging” or “Charged” indicator will appear in the display.
6.) Press the Function button on the top panel or on the remote control to select the iPod function.
Your iPod® will begin to play. It may begin playback with the first song in your library in alphabetical order by song name, or if the iPod® was only shut off for short time it may begin playback of the same song that was playing before it was shut off.
NOTE: If the 
Power of this system is ‘On’and the iPod function is already selected then your iPod® will begin to play as soon as it is connected to the dock, as long as the iPod® HOLD switch is ‘Off’. If your iPod® enters the Pause mode when you connect it to the dock, press the 
Play/pause button to begin playback.
27
iC200_052906.p65 | 27 |