2.) Select the correct adapter for your particular iPod® model from among the 5 different adapters included. Each adapter is engraved with the name and/or size of an iPod® model. Place the selected adapter in the docking area so that the iPod®
Gently press downward on the adapter until it “clicks” and locks in place.
3.) Mount the iPod® Support Bracket on the docking station as shown.
This bracket provides support and prevents your iPod® from moving too far backward when you operate the iPod® controls.
CAUTION: You must use this support bracket with all iPod® models to prevent possible damage to the iPod® connector.
IMPORTANT iPod® nano INSTRUCTIONS!
If you are using this system with an iPod® nano you will notice that the iPod®
Before inserting the iPod® nano adapter into the docking area you must slide the iPod®
NOTE: After removing the nano adapter remember to slide the
26
iC200_052906.p65 | 26 |
29/5/2006, 10:29