Emerson Process Management IC200BK owner manual Sleep Timer

Page 37

Sleep Timer

The Sleep Timer allows you to operate the radio or iPod® for up to 99 minutes while you are falling asleep and then shuts the power off automatically.

1.) Turn the system ‘On’and operate the radio or iPod® as usual.

Adjust the Volume control to the desired level for falling asleep, but remember that the level you set for falling asleep is that same level that you will hear in the morning if you are waking to radio or iPod® .

2.) Press the Sleep button on the top panel.

The display will briefly show “L:30” and the SLP (Sleep) indicator will appear.

The radio or iPod® will operate for 30 minutes and then shut off automatically.

3.) To change the amount of Sleep time depress and hold the Sleep button and

press the Tuning/Skip or buttons on the top panel or the / buttons on the remote control to decrease or increase the amount of sleep time from “01” minutes to “99” minutes.

NOTE: When you change the Sleep timer from the original 30-minute default setting your new setting becomes the new default setting.

For example if you change the Sleep timer setting from 30 minutes to 45 minutes, 45 minutes becomes the new default Sleep timer setting until you change it again.

4.) When the Sleep timer counts down to “00” the power shuts off automatically.

NOTE: If you set the Sleep timer for 60 minutes in the iPod mode, make sure you have selected an Album or a Playlist that is at least 60 minutes long. Otherwise the iPod® will stop at the end of your selected Album or Playlist, but the system Power will remain ‘On’until the Sleep timer counts down to “00”.

36

iC200_052906.p65

36

29/5/2006, 10:29

Image 37
Contents ITone Important Safety Instructions IC200052906.p65 29/5/2006 IC200052906.p65 29/5/2006 FCC Information IM Portant NotesPreparation for USE Unpacking and Set UpBattery Back-up System Power SourceFront Panel Top Panel LO CAT ION O F C ONT ROL S and in DIC ATO RSBack Panel Left Side Panel Touchless Snooze Sensor LED Display Remote Control Battery Precautions Installing The Remote Control BatteriesOPE Ratin G Inst Ructi ONS Setting The Time, The First TimeYear Display Date DisplayImportant Daylight Saving Time Information Daylight Saving and Leap Year AdjustmentsManual Time Adjustments Adjusting The Wake Up Times Checking The Wake Up Times And Alarm Mode Selecting The Alarm ModeUsing The Remote Control KHz Listening To The RadioIC200052906.p65 29/5/2006 Presetting Stations In The Tuner Memory Changing Preset Stations Recalling Preset StationsAntenna Information Listening To Your Dockable iPod / Charging The Battery Important iPod nano Instructions IC200052906.p65 29/5/2006 IC200052906.p65 29/5/2006 Listening To An iPod Shuffle / Charging The Battery IC200052906.p65 29/5/2006 Wake To Radio Alarm OperationWake To Buzzer Wake To Your iPod To Cancel The Alarms Snooze Alarm / Touchless Snooze Sleep Timer Dimmer Control Nap Timer Buzzer Alarm OnlyAuxiliary Input Jack Mute Control Remote Control OnlyPhones Stereo Headphone Jack Be Careful not to Lose this Small Screw Changing The Lithium BatteryIC200052906.p65 29/5/2006 Initial default setting is AM 1200, Saturday, January 1st 1 Resetting The Clock After a Total Memory LossImportant Note Care and M Aintenance Limited Warranty Emerson