Presetting Stations In The Tuner Memory
You can store a total of 20 stations, 10 FM and 10AM, in the tuner memory for easy recall at any time.
1.) Using either the Automatic or Manual Tuning method described above, tune to the first station you wish to store in the tuner memory.
Example: FM 92.5 MHz
2.) When the desired frequency appears on the display, press the Memory button on the top panel once.
“F 1” will begin flashing on the display indicating that you can now store your station in FM Preset Memory #1.
3.) Press the MEMORY button again. The “F 1” stops flashing. This indicates that FM 92.5 is now stored in FM Preset Memory #1.
4.) Tune to the next station that you wish to store.
Press the Memory button once, then press the Preset button to select Preset Memory #2.
“F 2” begins flashing in the display.
5.) Press the Memory button again to enter your desired station in Preset Memory #2.
6.) Repeat steps 4 and 5, using the Preset or buttons to select a different preset memory number each time until you have stored up to 10 FM stations in the memory.
22
iC200_052906.p65 | 22 |
29/5/2006, 10:29