Wake To Buzzer
Note: Alarm 1 and Alarm 2 have different buzzer sounds.
Alarm 1 is a “single beep” sound.
Alarm 2 is a “double beep” sound.
You will be able to tell which alarm is going off by the sound that it makes.
1.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left side panel to the “Buzzer” position.
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that the alarms are ‘On’.
2.) At the selected wake up time the electronic buzzer tone alarm will come on.
The buzzer sound will continue for one hour and then shut off automatically and reset itself for the following day.
To shut the buzzer off sooner you can press either the 
Power button or the appropriate Alarm 1 or Alarm 2 button on the top panel.
32
iC200_052906.p65 | 32 |
29/5/2006, 10:29