Friedrich SM15, SS15, SL 24, SL 22, YS10 operation manual Troubleshooting Tips, Unit does not operate

Troubleshooting Tips

	The unit is turned to the off position,	Turn the unit to the on position and raise or lower
		temperature setting (as appropriate) to call for
		operation.
		Plug into a properly grounded 3 prong receptacle.
		proper receptacle type for your unit.
Unit does not operate.		button latches and remains in) to resume operation.
	The circuit breaker has tripped or
	the supply circuit fuse has blown.	applicable. If the problem continues, contact a
		licensed electrician.
	There has been a local power	The unit will resume normal operation once power
	failure.	has been restored.
		The unit requires a dedicated outlet circuit, not
	the same circuit.	shared with other appliances.
		other air conditioner.
	The circuit breaker or time-delay
	fuse is not of the proper rating.
		for your unit. If the problem continues, contact a
		licensed electrician.
	button pops out) due to disturbances	button latches and remains in) to resume normal
	on your power supply line.	operation.
	Electrical overload, overheating, or
		resume normal operation.
	from the product manufacturer and must not be repaired.
	blocked.	are not blocked by curtains, blinds, furniture, etc.
	Windows or doors to the outside are	Ensure that all windows and doors are closed.
	open.
	The temperature is not set at a cool	warmer setting as necessary.
		remove obstruction.
	The indoor coil or outdoor coil is
	dirty or obstructed.	remove obstruction.
	(cooking, showers, etc.) in the room.	or bathing and, if possible, try not to use heat
		producing appliances during the hottest part of the
		day.
	The temperature of the room you	off a very hot room.

￿￿