P 12/16
Repair
[4] ADJUSTMENT
[4]-2 Parallel Adjustment of Base to Saw Blade
(1)Attach saw blade to the unplugged machine, and set the cutting depth of the machine to maximum with the bevel angle adjusted to 90 degrees.
(2)Make parallel adjustment of Base to saw blade as described in Fig. 16.
Fig. 16
1.Unlock Base from Blade case at the Cord guard side by loosening M5x8 Hex socket set screw a little.
2.Open Safety cover fully.
3.Move the Cord guard side of Base in the direction of large black arrows until the distance A is equal to B.
4.After the adjustment is finished, tighten M5x8 Hex socket set screw firmly with hex wrench.
M5x8 Hex socket set screw 
A |
B |
Cord guard