Makita HS7101, HS7100 specifications Necessary Repairing Tools

P 2/16

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

[1] NECESSARY REPAIRING TOOLS

Code No.	Description	Use for
1R003	Retaining ring S pliers ST-2N	Removing/mounting Retaining ring S-42, holding Safety cover
1R032	Bearing setting plate 8.2	Removing Spindle from Helical gear
1R207	45-degree set square	Adjusting accuracy of 45 degrees
1R208	90-degree set square	Adjusting accuracy of 90 degrees
1R217	Ring 22	Supporting Helical gear when removing Spindle
1R228	1/4” Hex shank bit for M4	Disassembling/assembling Rear angular guide
1R269	Bearing extractor	Removing Ball bearing 607ZZ from Spindle
1R280	Round bar for arbor 6-50	Removing Spindle from Helical gear
1R340	Bearing retainer wrench	Removing/mounting Bearing retainer 23-36

[2] LUBRICATION

Apply the following grease/ lubricant to the specific portions to protect parts and product from unusual abrasion.

Item No.	Description	Grease	Portion to lubricate	Amount
39	Blade case		Gear room	approx. 6 g
48	Bearing box		Drum portion where Safety cover pivots	a little
75	Angular guide		Contact surface where (39) Blade case pivots	a little
Fig. 1
			Makita Grease SG No.0
		39	VG100

48

75

Safety cover