Makita HS7101, HS7100 specifications Concave surface

Page 6

P 6/16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-3. Depth Guide

ASSEMBLING

Assemble Depth guide section by taking the reverse step of Disassembling. (Fig. 4)

Note: Follow the important instructions described in Fig. 5.

Fig. 5

1.M6x18 Hex bolt must be mounted to Blade case so that the concave surface of the bolt head faces M5x8 Hex socket set screw.

Blade case

M6x18 Hex bolt

Base

concave surface

M5x8 Hex socket set screw

2.M4x8 Pan head screw must be seen closest to Handle when Lever 70 is in the locking position with the cutting depth of the machine adjusted to minimum.

Handle

Lever 70 in the locking position, with the cutting depth of the machine adjusted to minimum

M4x8 Pan head screw

Image 6
Contents Specification Optional accessoriesStandard equipment Necessary Repairing Tools RepairDISASSEMBLY/ASSEMBLY BaseLock Lever for clamping Guide Rule Bow stop ringDepth Guide Concave surface Angular Guide Blade Case, Blade Cover, Safety Cover Put on the edge Helical Gear, Ball Bearing 6003DDW Handle Cover, Electrical Parts in Handle Angle of Saw Blade to BaseParallel Adjustment of Base to Saw Blade Circuit diagram HS6100 & HS7100 Without Electric brake and LED lightWiring diagram HS6101 & HS7101 With Electric brake and LED light Fig. D-3Fig. D-4 HS6101 & HS7101 With Electric brake and LED light