Makita HS7100, HS7101 specifications Depth Guide

Page 5

P 5/16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-3. Depth Guide

DISASSEMBLING

Disassemble Depth guide as described in Fig. 4.

Fig. 4

1.Set the cutting depth of the machine to minimum. Remove Lock plate from Lever 70 by unscrewing M4x8 Pan head screw.

2.From M6x18 Hex bolt, remove Lever 70, M6 Hex nut, Flat washer 6 and Sleeve 6.

 

M6 Hex nut

Lever 70

Flat washer 6

Sleeve 6

 

M4x8

 

Pan head screw

Lock plate

3.Fix M4-7 Hex lock nut with Wrench 7, then remove M4x20 Hex bolt with 1R288.

M4-7 Hex lock nut

M4x20 Hex bolt

M6x18 Hex bolt

4.Depth guide and Flat washer 6 on Blade case side can now be removed.

M6x18 Hex bolt

Depth guide

Flat washer 6

5.M6x18 Hex bolt can now be removed by loosening M5x8 Hex socket set screw a little bit.

M6x18 Hex bolt

M5x8 Hex socket set screw

Image 5
Contents Standard equipment SpecificationOptional accessories Repair Necessary Repairing ToolsBase DISASSEMBLY/ASSEMBLYBow stop ring Lock Lever for clamping Guide RuleDepth Guide Concave surface Angular Guide Blade Case, Blade Cover, Safety Cover Put on the edge Helical Gear, Ball Bearing 6003DDW Angle of Saw Blade to Base Handle Cover, Electrical Parts in HandleParallel Adjustment of Base to Saw Blade HS6100 & HS7100 Without Electric brake and LED light Circuit diagramWiring diagram Fig. D-3 HS6101 & HS7101 With Electric brake and LED lightFig. D-4 HS6101 & HS7101 With Electric brake and LED light