Lincoln Electric ES 275I specifications Voltage Reconnect Procedure

E-4		TROubLEShOOTING	E-4
	Observe all Safety Guidelines detailed throughout this manual
	PRObLEMS	POSSIbLE	RECOMMENDED
	(SYMPTOMS)	CAuSE	COuRSE OF ACTION
		OuTPuT PRObLEMS
Output turns on momentarily, then		1. Check the input voltages and
switches off and repeats cycle.		reconnection procedures. Make
		sure the input voltage is correct
		for the machine. See Input
		Voltage Reconnect Procedure.
		2. Check or replace remote control
		device. (If used)

			If all recommended possible areas of
			misadjustment have been checked
			and the problem persists, Contact
			your local Authorized Field Service
Remote output control not	1.	Make sure the Local/Remote Facility.
functioning. The machine operates		switch (S3) is in the REMOTE
normally on LOCAL control.		position.
	2.	The remote control device may
		be faulty. Replace.
	3.	The Local/Remote switch must
		be in the LOCAL position unless
		a remote control device is
		attached to the remote
		receptacle.

CAuTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, con- tact your local authorized field service facility for technical troubleshooting assistance before you proceed.

ES 275i