| TROubLEShOOTING | |||
|
|
|
|
|
| Observe all Safety Guidelines detailed throughout this manual | |||
|
|
|
|
|
| PRObLEMS | POSSIbLE | RECOMMENDED |
|
| (SYMPTOMS) | CAuSE | COuRSE OF ACTION |
|
|
|
|
|
|
OuTPuT PRObLEMS
The machine will not produce more than 200 amps.
1. This may be normal operation. If |
| |
the output current exceeds 300 |
| |
amps, an electronic protection |
| |
circuit will reduce the current to |
| |
less than 200 amps. The machine |
| |
will continue to produce this low |
| |
current until the protection circuit | If all recommended possible areas of | |
is reset. Reset occurs when the | ||
output load is removed. | misadjustment have been checked | |
and the problem persists, Contact | ||
| ||
2. Check the input voltage and input | your local Authorized Field Service | |
Facility. | ||
voltage reconnect procedures. |
| |
See Input Voltage Reconnect |
| |
Procedure. |
| |
3. Check for loose or faulty welding |
| |
cables. |
| |
|
|
CAuTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, con- tact your local authorized field service facility for technical troubleshooting assistance before you proceed.
ES 275i