Lincoln Electric IM788 manual Welding Operations, Sequence of Operation, Wire Loading

Page 16

 

 

OPERATION

B-3

B-3

 

 

FIGURE B.1a

 

 

WELDING AMP RANGE

 

25-125

 

1

 

2

 

 

 

 

 

 

 

 

 

WELDING AMP RANGE 25-125

3

SP-135 Plus

4.Circuit Breaker – Protects machine from damage if maximum output is exceeded. Button will extend out when tripped (Manual reset).

5.Gun Trigger - Activates welding output, wire feed, and gas solenoid operation. Releasing the trigger deactivates welding and simultaneously activates the “burnback” function so that the welding wire does not stick in the weld puddle. See FIG B.1b

FIGURE B.1b

+

-

5

WELDING OPERATIONS

SEQUENCE OF OPERATION

Wire Loading

Refer to Figure B.2 AND B3.

The machine power switch should be turned to the OFF (“O”) position before working inside the wire feed enclosure.

The machine is shipped from the factory ready to feed 4” (100 mm) diameter spools. A 4" (100 mm) diameter spool is mounted directly on the 5/8" (16 mm) diame- ter spindle that has a built-in adjustable friction brake to prevent overrun of the spool and excess slack in the wire. The wing nut at the end of the shaft is used to adjust the tension on the wire spool (See B.3 on the following page).

To use 8" (200 mm) diameter spools, the 2" (51 mm) diameter M15445 spindle must be used. Remove the spacer and wing nut at the end of the shaft. Insert spindle as shown in figure B.2. Reattach spacer and wing nut.

Note: When loading and removing the 8” Spools make sure that the wing nut (inside the wire spool spindle hub) is turned 90° from the wire spool spindle locking tab. If the wing nut is positioned in line with the locking tab, the tab cannot be depressed to load or unload the wire spool.

Make certain the start end of the wire, which may pro- trude through the side of the spool, does not contact any metallic case parts.

FIGURE B.2

Wire Spool Spindle

Locking Tab

8” Wire Spool

Be sure that this stud engages the hole in the wire spool.

To wire drive

Wire Spool must be pushed all the way on the spindle so that the spindle’s tab will hold it in place. The Wire Spool must rotate clockwise when wire is dereeled.

SP-135 PLUS

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SP-135 Plus Safety California Proposition 65 WarningsElectric Shock can kill Welding Sparks can cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a L’ArcPlease Examine Carton and Equipment For Damage Immediately On-Line Product RegistrationTable of Contents Installation Technical Specifications SP-135 PlusSafety Precautions Read entire installation section before startingInstallation Identify and Locate ComponentsWork Clamp Installation Work Cable InstallationSelect Suitable Location StackingGUN Installation Connecting Gun Cable to the SP-135GAS Connection PlusInput Connections Figure A.5Requirements For Rated Output Code Requirements for Input ConnectionsRequirements For Maximum Output Observe all safety information throughout this manual OperationFumes and Gases can be dangerous Welding Sparks can cause fire or explosionControls and Settings Design Features AdvantagesGeneral Description Welding CapabilityWelding Operations Wire LoadingSequence of Operation Friction Brake Adjustment Wire ThreadingShielding Gas Making a WeldCleaning Tip And Nozzle Changing Machine Over to Feed Other Wire SizesProcess Guidelines Wire Feed Overload Protection Overload ProtectionOutput Overload Thermal ProtectionApplication Chart Optional Accessories AccessoriesK586-1 Deluxe Adjustable Gas Regulator Hose Kit Replacement Parts Innershield Fcaw ConversionMaintenance Maintenance Safety PrecautionsItems Requiring no Maintenance Routine and Periodic MAINTE- NanceGUN and Cable Maintenance Configuration of Components in Wire Feeding SystemFor Magnum 100L GUN Contact Tip Cable Liner Drive RollChanging the Contact TIP Changing Drive RollChanging Liner GUN Handle PartsLiner trim length for gun with red trigger Magnum 100L Remove any burrs from the end of the linerTroubleshooting HOW to USE Troubleshooting GuideProblems Possible Areas Symptoms Misadjustments Troubleshooting GuideRecommended Course of Action Feeding Problems GAS Flow Problems Wiring Diagrams High VoltagePrecaucion Warnung

IM788 specifications

The Lincoln Electric IM788 is a cutting-edge industrial welding inverter known for its advanced features and technologies that enhance productivity and efficiency in various welding applications. This machine is specifically designed to cater to the demands of high-performance environments while maintaining reliability and ease of use.

One of the standout features of the IM788 is its multi-process capability. It offers MIG, TIG, and stick welding options, making it a versatile choice for welders who work with a diverse range of materials and thicknesses. This flexibility enables operators to switch processes seamlessly without compromising on performance, thereby increasing overall productivity.

The IM788 is equipped with Lincoln Electric's exclusive Synchronized Arc Control Technology, which optimizes the arc characteristic for different materials and welding conditions. This technology helps to achieve cleaner and more precise welds, minimizing the need for post-weld finishing. Additionally, the machine offers a broad range of voltage and amperage settings, allowing for fine-tuning based on specific project requirements.

Another significant attribute of the IM788 is its built-in intelligence. The machine incorporates advanced microprocessor control, which enhances user interface capabilities and allows for easy adjustments to welding parameters. The intuitive digital display provides real-time feedback on settings and performance, enabling operators to make informed decisions and adjustments as needed.

Durability is also a key characteristic of the Lincoln Electric IM788. Its hardened metal case ensures protection against harsh working conditions, while internal components are designed to withstand heavy usage. This robust construction not only extends the machine's lifespan but also maintains consistent performance even in demanding environments.

The IM788's compact design and lightweight construction make it portable and easy to transport, allowing welders to move it effortlessly between job sites. Coupled with its energy-efficient operation, this inverter contributes to lower operational costs, making it an economical investment for both small workshops and large industrial operations.

In summary, the Lincoln Electric IM788 stands out for its multi-process capabilities, advanced welding technologies, user-friendly interface, and robust design. These features make it an ideal choice for professionals seeking a reliable and efficient welding solution. Whether for fabrication shops, construction sites, or maintenance applications, the IM788 delivers exceptional performance and versatility, solidifying its position as a leading welding inverter in the market.
Top Page Image Contents