ACCESSORIES | ||
|
|
|
K1779-7 Dual Gas Cylinder Holder Kit
(See Figure C.6)
Mounts directly to the stanchion. Includes bracket, chains and hardware.
WARNING
•If the Dual Gas Cylinder Holder Kit is installed to a Lift Truck Platform, the gas bottles must be removed before the platform is lifted or moved.
•Do not remove the 180° travel stops from the arm if both the Dual Gas Cylinder Holder Kit and the Wire Spindle Mounting Kit are mounted to the arm. If the travel stops are removed, the
wire spools may impact the gas cylinders.
1.Mount the chain holder bracket to the welding arm stanchion.
2.Secure the bottle ring holder to either the lift truck platform (if present) or directly to the floor.
3.Use the leveling bolts as necessary to correct for uneven floors.
FIGURE C.6
K1779-8 Wire Spindle Mounting Bracket
(See Figure C.7)
Bracket for mounting the mast and spindle at a lower, more convenient height.
Includes bracket and mounting hardware for mounting the mast and spindle from a bench feeder or
WARNING
•Do not remove the 180° travel stops from the arm if both the dual gas cylinder kit and the wire spindle mounting kit are mounted to the arm. If the travel stops are removed, the wire spools may impact the gas cylinders.
FIGURE C.7)
Chain Holder
Bracket
Chain Holder
BracketHolder
Bottle Ring |
|
Holder | Leveling Bolts |
WELDING ARMS