Options and Accessories

C-1	ACCESSORIES	C-1

K1779-11 Mini Console

(See Firgure C.1)

The mini console adds more useful functions to the welding arms. Included with the mini console are:

•1/2" threaded female bulkhead fitting with 25ft. (7.6

m)of braided air hose for compressed air connec- tions.

•Duplex receptacle with 25ft. (7.6 m) of 12/3 SJ cord and male plug, rated for 15 amps.

•Panel mounted vacuum inlet connector (female) and two flexible hoses.

•Welding gun hanger bracket.

•Mounting hardware.

The mini console bolts to the underside of the Universal Wire Feeder bracket for quick installation.

(See Firgure C.2)

1.Assemble the vacuum inlet to the front of the Mini Console Body using the M6 nuts and bolts provided.

2.Install the 1/4" short anchor couplers to the front of the Mini Console Body.

3.Insert the 1/4" NPT male thread 3/8" hard hose connector into the rear of the anchor coupler using teflon tape to seal the threads.

4.Remove the rear lower knock out in the electrical box and install the romex connector.

5.Insert the two 1/4"-20 x 1-1/2" carriage bolts into the two holes at the front of the K1779-9 feeder support.

6.Mount the Mini Console Body to the bottom of the feeder support and secure with nut and washer inside the con- sole.

7.Feed the electrical cable and 3/8" braided air hose through the 2" structural tube of the right side on the arm.