Lincoln Electric IM886 Product Description, Product Summary, Recommended Processes and Equipment

Page 8

1

PRODUCT DESCRIPTION

1

 

 

 

PRODUCT SUMMARY

General Physical Description

The Lincoln Welding Arms create an organized work environment. The models available are:

6000 series Stanchion Mount for bolting to an appropriately prepared floor.

All welding arms are constructed with strong steel tub- ing. The design is light weight yet stiff, and provides for clever cable routing. When using optional vacuum equipment, the tubes provide a sleek path for fume and dust extraction.

For further flexibility, an optional lift truck platform is available, making it easy to transport the welding arm about the work site.

Order the optional mini-console for compressed air, electric and vacuum connections at the wire feeder.

General Functional Description

The welding arms suspend the wire feeder and weld- ing cables above the floor, allowing the work area to be fully devoted to fabrication. Control cables, elec- trode liners, electrode cables, shielding gas hoses, etc. are neatly routed through the tubing of the arm for protection.

6000 series arms feature counterbalance springs to equalize the weight of the feeder and to allow the operator to choose the working height. The operator simply glides the arm into position and begins to weld.

RECOMMENDED PROCESSES AND EQUIPMENT

RECOMMENDED PROCESSES

GMAW (including GMAW-P, GMAW-STT if sup- ported by the power source and wire feeder.)

FCAW

PROCESS LIMITATIONS

The arms are not suitable for SAW because of the weight of a typical SAW system.

RECOMMENDED EQUIPMENT

The welding arms are compatible with the following wire feeders:

Power Feed 10 and Power Feed 10M

Power Feed 10 Dual and Power Feed 10M Dual

LN-10

DH-10

LF-72

EQUIPMENT LIMITATIONS

The total weight of all equipment, guns and cables mounted to or hanging from the welding arm must not exceed 150 lb. (68kg).

When using the optional K1779-1 platform, a mini- mum weight of 300lb (136kg) must be secured to the platform to prevent tipping.

WELDING ARMS

Image 8
Contents Safety Depends on You Lincoln Welding ArmsSafety California Proposition 65 WarningsElectric Shock can kill Welding Sparks can cause fire or explosion IiiPrécautions DE Sûreté Thank You Table of Contents Product Description Product SummaryRecommended Processes and Equipment General Physical DescriptionCommon Equipment Packages Series Stanchion MountSpecifications Design FeaturesInstallation NON-STANDARD Safety InformationProduct Specific Installation Instructions Location15.2 Installation Weld Cable Sizes Adjusting for Wire Feeder Weight Adjusting the Welding ARM TravelTo change the arm triangle position To change the tension clevis positionSafety Precautions Shielding GAS Connection OperationAccessories Options and AccessoriesMini Console Assembly Instructions K1779-11 Mini ConsoleFigure C.2 Welding Arms K1779-13Single Electrode Liner Kit K1779-9Universal Wire Feeder BracketK1779-14 x 4 x 1 Lift Truck Platform K1779-8Wire Spindle Mounting Bracket K1779-7Dual Gas Cylinder Holder KitMaintenance Routine MaintenanceDimension Print Welding Arms Welding Arms Welding Arms Precaucion Warnung