Lincoln Electric SA-250 manual Accessories, Optional Features Field Installed

Page 16

C-1

ACCESSORIES

C-1

 

 

 

OPTIONAL FEATURES (Field Installed)

Accessory Set (K704) - Includes electrode and work cables, headshield, work clamp and electrode holder.

TIG Module (K930-2) - Portable, high frequency unit with gas valve for TIG welding. Rated at 300 amps / 60% duty cycle. (Request Publication E3.205).

Power Plug Kit (K802D) - A power plug kit for the auxiliary power receptacles is available. (Provides a plug for each receptacle.)

Remote Control Kit (K924-4) - Contains a remote control rheostat, and 100 ft (30.5m) cable for adjusting the OCV at the welding site.

Trailer (K957-1) - Two-wheeled trailer for in-plant and yard towing at speeds under 20 mph only.

Trailer (K953-1) - Two-wheeled trailer with optional fender and light package. For highway use, consult applicable federal, state, and local laws regarding possible additional requirements. Choice of 2 hitches and add on fender & light package. Order: K953-1

Trailer, K958-1 Ball Hitch, K958-2 Lunette Eye Hitch, K959-1 Fender & Light Kit.

WARNING

Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.

------------------------------------------------------------------------

Wire Feed Module (K623-1) - Provides constant voltage (CV) output with improved arc stability for Innershield welding. Excellent for MIG welding. Recommended wire feeders are the LN-7,LN-23P and LN-25. (Factory installed on the K1643-2).

GFCI Receptacle Kit (K1690-1) - Includes one UL approved 115V ground fault circuit interrupter duplex type receptacle with cover and installation instruc- tions. Replaces the factory installed 115V duplex receptacle. Each receptacle of the GFCI duplex is rated at 20 amps. Maximum total current from the GFCI duplex is limited to 20 amps.

Spark Arrestor Kit (K903-1) - Includes a heavy gage steel, approved spark arrestor, clamp and adapter for mounting to the muffler exhaust pipe.

Oil Drain Kit (K1586-1) - Includes ball valve, hose and clamp.

Water Valve Kit (K844-1)

SA-250

Image 16
Contents SA-250 Safety California Proposition 65 WarningsElectric Shock can kill Welding Sparks can cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a L’ArcThank You Please Examine Carton and Equipment For Damage ImmediatelyTable of Contents Installation Technical Specifications SA-250 K1283-8Height Width Depth Weight AIR Cleaner Engine Idler Muffler Engine ProtectionPRE-OPERATION Installation Exhaust Spark ArresterLocation / Ventilation Machine GroundingPRE-OPERATION Service Polarity Control and Cable SizesOIL Fuel4INSTALLATIONA-4 Battery ChargingTo prevent Explosion when To prevent Electrical Damage whenSafety Precautions OperationGeneral Description Control PanelEngine Operation Cold Weather StartingStarting the SA-250 Perkins Diesel EngineControl of Welding Current Welder OperationIdler Operation Auxiliary Power Optional Features Field Installed AccessoriesWater Valve Kit K844-1 SA-250 Maintenance MaintenanceIdler Maintenance Purging AIR from Fuel System Perkins 104-22 EngineNameplates Vent Screw Priming LeverEngine Service Troubleshooting HOW to USE Troubleshooting GuideAuthorized Field Service Facility Welder TroubleshootingContact your local Lincoln Engine Troubleshooting Contact your local Lincoln Authorized Field Service FacilityFaulty Charging Loose fan belt Electronic Idler Troubleshooting Guide Open ClosedAuxiliary Power Load is Turned on Defective -- Will Not CloseSA-250 Wiring Diagram DiagramsDimension Print SA-250 SA-250 How To Read Shop Drawings New Lessons in Arc WeldingNeed Welding Training? Basic CoursePrecaucion Warnung
Related manuals
Manual 28 pages 46.12 Kb