Lincoln Electric manual Installation, Technical Specifications SA-250 K1283-8

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - SA-250 ( K1283-8)

INPUT - DIESEL ENGINE

Make/Model

Perkins 104-22

Description	Horsepower	Operating	Displacement cu. in.(ltrs)	Starting	Capacities
	@ 1800RPM	SPEED		System
				12VDC Battery
4 Cylinder		High		and starter	Fuel: 15gal.(57L)
4 Stroke
					Oil: 8.7 qts.
Naturally		1800RPM
	32.7 HP			Push Button	(8.2L)
Aspirated		Full Load	135.6 (2.2)
				Starter
Water
		1725RPM
Cooled
				(650 Cold	Radiator Coolant
Engine		Low Idle
				crank amps)	9.5 qts.
		1400RPM
					(9.0L)

RATED OUTPUT @ 104°F(40C°) - WELDER

DESCRIPTION	RATED DC OUTPUT*	DUTY CYCLE	DC CURRENT RANGE
	VOLTS @ RATED AMPS		Fine Adjustment in each Range
			40-350 AMPS
300 Amp DC Welder	30V @ 250A	100%	220-Max.
			160-240
All Copper Windings	32V @ 300A	60%	120-190
Pure DC Power Generator	98V DC Max. OCV @ 1800RPM		80-130
			Min.-90

RATED OUTPUT @ 104°F(40C°) - GENERATOR

Auxiliary Power 1

3,000 Watts Continuous, 60 Hz AC

26 Amps @115V

13 Amps @ 230V

PHYSICAL DIMENSIONS

HEIGHT	WIDTH	DEPTH	WEIGHT
43.13** in.	28.00 in.	67.00 in.
1096.0 mm	711.2 mm	1702.0mm	1470 lbs. (667kg.)

ENGINE COMPONENTS

LUBRICATION		FUEL SYSTEM	GOVERNOR
Full Pressure with	Full Flow Filter	Indirect Fuel Injector	Mechanical Governor
		Electrical Shutoff Solenoid
		Mechanical Fuel Pump
AIR CLEANER	ENGINE IDLER	MUFFLER	ENGINE PROTECTION
		Low noise Muffler:	Shutdown on low oil
Single Element	Automatic Idler	Made from long life,	pressure and engine
		aluminized steel.	temperature.

1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

*Based on a 10 min. period.

**Includes Top of Lift Bale.

SA-250