Milwaukee 9082-20, 9081-20, 9083-20 Power Tool USE and Care, Battery Tool USE and Care, Service

POWER TOOL USE AND CARE

16.	Do not force the power tool. Use the
	correct power tool for your applica-
	tion. The correct power tool will do the
	job better and safer at the rate for which
	it was designed.
17.	Do not use the power tool if the switch
	does not turn it on and off.Any power tool
	that cannot be controlled with the switch is
	dangerous and must be repaired.
18.	Disconnect the plug from the power

25.	Use power tools only with specifically
	designated battery packs. Use of any
	other battery packs may create a risk of
	injury and fire.
26.	When battery pack is not in use, keep
	it away from other metal objects like
	paper clips, coins, keys, nails, screws,
	or other small metal objects that can
	make a connection from one terminal
	to another. Shorting the battery terminals
	together may cause burns or a fire.
27.	Under abusive conditions, liquid may
	be ejected from the battery, avoid

3.Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

4.Hold power tools by insulated grip- ping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make ex- posed metal parts of the tool “live” and shock the operator.

Symbology

Volts Direct Current

Impacts per Minute

Under Load (IPM)

Underwriters

Laboratories, Inc.

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preven-

tive safety measures reduce the risk of

starting the tool accidentally.

19. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tools or

these instructions to operate power

tools. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool's operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

22. Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

BATTERY TOOL USE AND CARE

23.Ensure the switch is in the off posi- tion before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.

24.Recharge only with the charger speci- fied by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

contact. If contact accidentally oc-

curs, flush with water. If liquid con-

tacts eyes, additionally seek medical

help. Liquid ejected from the battery

may cause irritation or burns.

SERVICE

28.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

1.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

2.WARNING! Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known to cause cancer, birth defects or other reproduc- tive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ven- tilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Specifications

Catalog				Drive		Average
		Volts			IPM	Torque
No.	Type	DC	RPM	Shank		Output
9081-20	Impact Driver	14.4	0-2600	1/4" Hex	0-3300	740 in-lbs.
9082-20	Impact Wrench	14.4	0-2600	3/8" Square	0-3500	1056 in-lbs.
9083-20	Impact Wrench	14.4	0-2600	1/2" Square	0-3500	1404 in-lbs.

FUNCTIONAL DESCRIPTION

Cat. No. 9082

1.3/8" square drive shank

2.	Forward/reverse switch	1
		2
3.	Trigger
4.	Battery pack	3

5.Battery pack release button

6.Hex drive chuck

7.	1/2" square drive shank	4
6	7

5

Cat. No. 9081 Cat. No. 9083

4 5