Lincoln Electric 275 manual Amphenol

Page 31

C-5

ACCESSORIES - CONNECTION DIAGRAMS

C-5

RANGER 275 / LN-742 CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Keep guards in place.

Disconnect NEGATIVE (-) BATTERY LEAD

Keep away from moving parts.

before servicing.

Only qualified personnel should install,use

Do not touch electrically live parts.

or service this equipment.

14 PIN

AMPHENOL

TO WORK

ELECTRODE

TO LN-742 INPUT

CABLE PLUG

K592 CONTROL CABLE

ELECTRODE CABLE

TO WIRE FEED UNIT

TO WORK

CAUTION :

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WILL CAUSE AN INCREASE IN THE THE AC AUXILIARY VOLTAGE. IF THIS VOLTAGE GOES OVER 140 VOLTS, WIRE FEEDER CONTROL CIRCUITS MAY BE DAMAGED. THE ENGINE GOVERNOR SETTING IS PRE-SET AT THE FACTORY - DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN

THE ENGINE WELDER OPERATING MANUAL.

N.A. WELDING CABLES MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.

N.B. CONNECT WELDING CABLES TO OUTPUT STUDS FOR DESIRED POLARITY. POSITION THE WIRE FEEDER VOLTMETER SWITCH TO MATCH THE POLARITY OF THE ELECTRODE CABLE.

N.C. PLACE THE MODE SWITCH IN THE " WIRE WELDING-CV" POSITION.

N.D. PLACE WELDER TERMINALS SWITCH TO "REMOTELY CONTROLLED" POSITION.

N.E. IF OPTIONAL REMOTE OUTPUT CONTROL IS USED, PLACE OUTPUT CONTROL SWITCH IN "OUTPUT CONTROL REMOTE" POSITIION. N.F. PLACE IDLER SWITCH IN "AUTO" OR "HIGH" IDLE POSITION AS DESIRED.

RANGER 275 / LN-8 CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Keep guards in place.

Disconnect NEGATIVE (-) BATTERY LEAD

Keep away from moving parts.

before servicing.

Only qualified personnel should install,use

Do not touch electrically live parts.

or service this equipment.

A

S24095-5

14PIN AMPHENOL

+ -

TO LN-8 INPUT

CABLE PLUG

K595 CONTROL CABLE

TO WORK

ELECTRODE CABLE TO WIRE FEED UNIT

CAUTION :

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WILL CAUSE AN INCREASE IN THE THE AC AUXILIARY VOLTAGE. IF THIS VOLTAGE GOES OVER 140 VOLTS, WIRE FEEDER CONTROL CIRCUITS MAY BE DAMAGED. THE ENGINE GOVERNOR SETTING IS PRE-SET AT THE FACTORY - DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN

THE ENGINE WELDER OPERATING MANUAL.

N.A. WELDING CABLES MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE

APPLICATIONS. SEE OPERATING MANUAL.

N.B. CONNECT WELDING CABLES TO OUTPUT STUDS FOR DESIRED POLARITY. POSITION THE WIRE FEEDER VOLTMETER SWITCH TO MATCH THE POLARITY OF THE ELECTRODE CABLE.

N.C. PLACE THE MODE SWITCH IN THE "WIRE WELDING-CV" POSITION. PLACE LOCAL / REMOTE SWITCH IN "REMOTE" POSITION. N.D. PLACE IDLER SWITCH IN "HIGH" POSITION.

A

S24095-6

RANGER 275

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Ranger Safety Electric Shock can kill Cylinder may explode if damaged Précautions DE Sûreté Thank You Table of Contents Vii Installation Technical Specifications Ranger 275 K1641-1 Installation Instructions PRE-OPERATION Engine Service Fuel Electrical Connections Auxiliary Power RECEPTACLES, PLUGS, and HAND-HELD Equipment Figure A.1 Operating Instructions Safety InstructionsDesign Features OperationRecommended Applications Additional Safety PrecautionsLimitations Figure B.1 Output Panel Controls WELDER/GENERATOR Controls Controls and SettingsBefore Starting the Engine Engine OperationStarting the Engine Table B.1 Stopping the EngineLocal Welding OperationWelder Controls Function and Operation ARC ControlPipe Welding Stick WeldingTIG Welding Table B.2 Typical Current Ranges 1 for Tungsten ELECTRODES2 Wire WeldingUsed Switch Table B.3 Summary of Welding Processes and Machine SettingsSimultaneous Welding and Power Loads Auxiliary PowerTable B.4 General Options Accessories AccessoriesTIG Welding Options Accessories Semiautomatic Fcaw and MIG Welding Options / Accessories Accessories Connection Diagrams PIN Amphenol Amphenol Ranger 275 to K867 Control Cable Adapter Connection Diagram Ranger 275 / K930 TIG Module / Connection Diagram Engine Maintenance Parts Table D.1 MaintenanceSafety Precautions Routine and Periodic Engine MaintenanceTable D.2 Kohler Engine Maintenance Schedule Table D.3 Engine OIL Refill Capacities AIR Cleaner ServiceChanging the Engine OIL Table D.4 OIL Filter Tigntening TorquesTable D.6 Spark Plug Installation Specifications Spark Plug ServiceEngine Adjustments Fuel Filter ServiceBattery Maintenance Servicing Optional Spark Arrestor Welder / Generator MaintenanceCleaning Brush Removal and ReplacementHOW to USE Troubleshooting Guide 1TROUBLESHOOTINGE-1Troubleshooting Field Service Facility for technical No welding power output Contactor switch in wrong posi Wiring Diagram DiagramsDimension Print Ranger How To Read Shop Drawings Precaucion Warnung
Related manuals
Manual 48 pages 43.55 Kb Manual 8 pages 23.28 Kb

275 specifications

The Lincoln Electric 275 is a versatile multi-process welding machine that stands out for its advanced features and robust performance. Designed for both novice and experienced welders, the machine offers MIG, TIG, and stick welding capabilities, making it a valuable tool for a variety of applications.

One of the main features of the Lincoln Electric 275 is its power output. With an impressive selection of amperage settings, it can deliver between 25 to 275 amps, making it suitable for both thin and thick materials. This flexibility allows users to work on projects ranging from automotive repairs to industrial fabrication.

The machine utilizes inverter technology, which significantly enhances its efficiency and reduces power consumption. Inverter welders are known for their lightweight design and compact size compared to traditional transformer-based welders. This portability makes the Lincoln Electric 275 easy to transport to job sites, catering to both professional and hobbyist welders who require mobility.

Another defining characteristic of the Lincoln Electric 275 is its easy-to-use interface. The digital display provides clear readings, allowing users to effortlessly adjust settings for optimal performance. Additionally, the machine features a user-friendly control panel with distinct knobs for regulating voltage and wire feed speed, assisting welders in achieving precise welds.

The Lincoln Electric 275 is also equipped with advanced arc technologies. Its built-in arc control enhances the stability of the welding arc, resulting in a smoother, more consistent weld. Furthermore, the machine offers synergic controls that automatically adjust the voltage and wire feed speed based on the selected material and thickness, making the welding process more intuitive and reducing the margin for error.

Durability is another hallmark of the Lincoln Electric 275. Constructed with high-quality materials, the machine is built to withstand the rigors of daily use in demanding environments. Its design also incorporates efficient cooling mechanisms to prevent overheating during prolonged operations, ensuring longevity and reliability.

In conclusion, the Lincoln Electric 275 is a powerful and adaptable welding machine that combines advanced technology with user-friendly features. Its multi-process capabilities, inverter technology, and robust construction make it an essential tool for both professional welders and DIY enthusiasts. Whether tackling intricate projects or heavy-duty tasks, the Lincoln Electric 275 proves to be a reliable choice that does not compromise on performance.
Top Page Image Contents