Lincoln Electric 400 (AU) manual Installation, Technical Specifications Vantage 400 AU K32038-1

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - VANTAGE® 400 (AU) (K32038-1)

Make/Model Code No.

Perkins 404D-22

		INPUT - DIESEL ENGINE
Description		Speed (RPM)	Displacement	Starting
			cu. in. (ltrs.)	System
4 cylinder			135.6(2.2)	12VDC Battery
27.6	HP	High Idle 1565		& starter
1500	RPM		Bore x Stroke	(Group 34; 650
naturally aspirated		Full Load 1500	cold crank amps)
water cooled			3.43” X 3.64”	65 Amp Alternator
Diesel Engine		Low Idle 1200	(87.1mm x 92.5mm)	W / Built in Regulator

Capacities

Oil:

8.45Qts. (8.0L) Fuel: 20 gal. (75.7 L)

Radiator Coolant: 8.0Qts. (7.6L)

RATED OUTPUT @ 104° F (40° C) - WELDER

Welding Process	Welding Output	Output Range	Max. Weld OCV
	Current/Voltage/Duty Cycle		@Rated Load RPM
DC Constant Current	350A / 34V / 100%	30 TO 400 AMPS
DC Pipe Current	300A / 32V / 100%	40 TO 300 AMPS	60 Volts (2)
Touch-Start™TIG	250A / 20V / 100%	20 TO 250 AMPS
DC Constant Voltage	350A / 34V / 100%	14 TO 34 VOLTS
Arc Gouging	350A / 34V / 100%	90 TO 400 AMPS	60 Volts

RATED OUTPUT @ 40° C (104° F).- GENERATOR

Auxiliary Power (1)

14,000 Watts Peak / 13,200 Watts Continuous, 50 Hz 400 Volts 3-Phase 6,900 Watts Peak(3) / 6,900 Watts Continuous, 50 Hz 230 Volts 1-Phase Sound Levels (Sound power: 96 dB Lwa)

ENGINE

LUBRICATION		EMISSIONS			FUEL SYSTEM			GOVERNOR
Full Pressure				Mechanical Fuel Pump, Auto air bleed				Mechanical
with Full Flow Filter	EPA Tier IV Interim			system, Electric shutoff solenoid, Indirect fuel injector.
AIR CLEANER	ENGINE IDLER				MUFFLER	ENGINE PROTECTION
				Low noise Muffler:			Shutdown on low oil
Single Element		Automatic Idler		Top outlet can be rotated.			pressure & high engine
			Made from long life, aluminized steel.				coolant temperature
ENGINE WARRANTY:	2 years / 2000 hours, all non-electric components, 3 years major non-electric compo-
nents . See Perkins warranty for details.
		PHYSICAL DIMENSIONS
HEIGHT		WIDTH			DEPTH		WEIGHT
35.94 (4) in.		27.00 in			60.00 in.
							1230 lbs. (559kg.)
913 mm		686 mm			1524 mm

(1)Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

(2)Reduced to less than 30V in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.

(3)Maximum per circuit breaker rating.

(4)To Top of enclosure. Add 7.35 (186.7mm) to top of exhaust. Add 3.87”(98.3mm) to top of Lift Bail.

VANTAGE® 400 (AU)