Friedrich ZQ08A10C manual Features, Control Locations, Control only Model

Page 4

1.4 FEATURES

•Designed for cooling only.

•Powerful and whisper cooling.

•Slide-in and slide-out chassis for the simple installation and service.

•Side air-intake, side cooled-air discharge.

•Built in adjustable THERMOSTAT.

•Washable one-touch filter.

•Compact size.

•Reliable and efficient rotary compressor equipped.

1.5 CONTROL LOCATIONS

1.5.1 CONTROL ONLY MODEL

• VENTILATION

The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN position.

The damper is opened and room air is exhausted.

NOTE

Before using the ventilation feature, make a ventilation kit. First, pull down part Ⓐ to horziontal line with part Ⓑ.

•FOR NORMAL COOLING

1.Turn the Mode switch to the High, Med or Low Cool setting.

2.Set the Temperature control to the desired temperature point (the mid-point is a good starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer setting, as appropriate.

•FOR MAXIMUM COOLING

1.Turn the Mode switch to the High Cool setting.

2.Set the temperature control to the highest temperature point (all the way to the right).

•FOR QUIETER OPERATION

1.Turn the Mode switch to the Low Cool setting.

2.Set the Temperature control as needed.

•Energy Saver Switch

This rocker switch can be depressed to either YES or NO. In the YES position, you will get the most economical operation. Both the fan and the compressor will cycle on and off together, maintaining the selected temperature at a more constant level and reducing the humidity more efficiently. This control will only operate when the unit is in a cooling mode. In the NO position, the fan will run constantly as long as the unit is in the cooling mode.

CLOSE VENT OPEN

Part B

Part A

—4—

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Room Air Conditioner Service and Parts Manual ZStarTM Contents PrefaceSpecifications ModelsZQ08A10C ItemsControl Locations FeaturesControl only Model Disassembly Instructions Mechanical PartsFront Grille CabinetAIR Guide and Blower AIR Handling PartsFAN and Shroud Electrical Parts Overload ProtectorCompressor CapacitorRotary Switch Power CordThermostat Refrigerating Cycle CondenserEvaporator Capillary TubePage Pulling Vacuum Installation Hardware InstallationSelect the Best Location Window Requirements Storm Window RequirementsWood Pieces Width Minimum 1 1/238mmPreparing the Unit for Installation Before InstallationInstall the Case in the Window Install the AIR Conditioner in the Case To Reverse the Grille OpeningTroubleshooting Guide Outside DimensionsPiping System Evaporator CoilTroubleshooting Guide Ineffective CoolingFails to Start Name Plate Rating Minimum Maximum Room AIR Conditioner Voltage LimitsComplaint Cause Remedy Complaint Cause Remedy Complaint Cause Remedy Schematic Diagram Circuit DiagramModel ZQ08A10C Description QTYExploded View Replacement Parts List Model ZQ08A10CControl BOX Assy Use Factory Certified Parts
Related manuals
Manual 28 pages 46.28 Kb

ZQ08A10C specifications

The Friedrich ZQ08A10C is an advanced cooling unit designed to meet the needs of residential and commercial environments. This portable air conditioner is especially notable for its efficiency, convenience, and cutting-edge technologies, making it an ideal choice for those seeking reliable temperature control.

One of the main features of the ZQ08A10C is its impressive cooling capacity. With a power rating of 8,000 BTUs, this unit is capable of effectively cooling spaces up to 350 square feet, making it suitable for large rooms, offices, and even some small apartments. The air conditioner operates quietly, allowing users to enjoy a comfortable indoor climate without disruptive noise.

Efficiency is a critical characteristic of the ZQ08A10C. It is equipped with an Energy Efficiency Ratio (EER) that ensures lower energy consumption compared to traditional air conditioning systems, which translates to lower utility bills. This model also utilizes eco-friendly refrigerant, contributing to a reduced environmental impact while maintaining high performance.

The design of the Friedrich ZQ08A10C prioritizes portability and ease of use. Casters allow for effortless movement from one room to another, making it versatile for various settings. Additionally, the unit features a digital thermostat with a remote control, enabling users to set their desired temperature from a distance. The easy-to-read display provides clear information on temperature settings and operational modes.

Technologically, the ZQ08A10C includes multiple fan speeds and a programmable timer, enhancing user control over the cooling experience. The unit also features a dehumidification function, helping to remove excess moisture from the air, which is essential for maintaining comfort in humid environments.

Maintenance is simplified through the inclusion of a washable filter, promoting clean air circulation and extending the lifespan of the unit. Furthermore, the installation process is straightforward, often requiring no additional tools beyond those included in the packaging.

In summary, the Friedrich ZQ08A10C stands out for its robust cooling efficiency, user-friendly features, and portability. Its innovative technologies and durable performance make it a strong contender in the market of portable air conditioning solutions, suitable for a variety of spaces and settings.
Top Page Image Contents