Friedrich ZQ08A10C manual AIR Handling Parts, AIR Guide and Blower, FAN and Shroud

Page 6

2.2 AIR HANDLING PARTS

2.2.1 AIR GUIDE AND BLOWER

1.Remove the front grille. (Refer to section 2.1.1)

2.Remove the cabinet. (Refer to section 2.1.2)

3.Remove the control box. (Refer to section 2.1.3)

4.Remove the 3 screws which fasten the brace.

5.Remove the brace.

6.Remove the 2 screws which fasten the evaporator.

7.Move the evaporator forward and pulling it upward slightly. (See Figure 4)

8.Move the evaporator to the left carefully.

9.Pull out the hook of orifice by pushing the tabs and remove it. (See Figure 5)

10.Remove the clamp with a hand plier which secures the blower.

11.Remove the blower.

12.Remove the 4 screws which fasten the air guide from the barrier.

13.Move the air guide backward, pulling out from the base pan.

14.Re-install the components by referring to the removal procedure, above.

Figure 4

Figure 5

2.2.2 FAN AND SHROUD

1.Remove the cabinet. (Refer to section 2.1.2)

2.Remove the brace (Refer to section 2.2.1)

3. Remove the 3 screws which fasten the condenser.

4. Move the condenser to the left carefully.

5. Remove the clamp which secures the fan.

6. Remove the fan and then pull out the shroud. (See Figure 6)

7. Re-install by referring to the removal procedure.

Figure 6

— 6—

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Room Air Conditioner Service and Parts Manual ZStarTM Contents PrefaceZQ08A10C SpecificationsModels ItemsFeatures Control LocationsControl only Model Front Grille Disassembly InstructionsMechanical Parts CabinetAIR Handling Parts AIR Guide and BlowerFAN and Shroud Compressor Electrical PartsOverload Protector CapacitorPower Cord Rotary SwitchThermostat Evaporator Refrigerating CycleCondenser Capillary TubePage Pulling Vacuum Installation Installation HardwareSelect the Best Location Wood Pieces Window RequirementsStorm Window Requirements Width Minimum 1 1/238mmPreparing the Unit for Installation Before InstallationInstall the Case in the Window Install the AIR Conditioner in the Case To Reverse the Grille OpeningTroubleshooting Guide Outside DimensionsPiping System Evaporator CoilTroubleshooting Guide Ineffective CoolingFails to Start Room AIR Conditioner Voltage Limits Name Plate Rating Minimum MaximumComplaint Cause Remedy Complaint Cause Remedy Complaint Cause Remedy Model ZQ08A10C Schematic DiagramCircuit Diagram Description QTYExploded View Replacement Parts List Model ZQ08A10CControl BOX Assy Use Factory Certified Parts
Related manuals
Manual 28 pages 46.28 Kb

ZQ08A10C specifications

The Friedrich ZQ08A10C is an advanced cooling unit designed to meet the needs of residential and commercial environments. This portable air conditioner is especially notable for its efficiency, convenience, and cutting-edge technologies, making it an ideal choice for those seeking reliable temperature control.

One of the main features of the ZQ08A10C is its impressive cooling capacity. With a power rating of 8,000 BTUs, this unit is capable of effectively cooling spaces up to 350 square feet, making it suitable for large rooms, offices, and even some small apartments. The air conditioner operates quietly, allowing users to enjoy a comfortable indoor climate without disruptive noise.

Efficiency is a critical characteristic of the ZQ08A10C. It is equipped with an Energy Efficiency Ratio (EER) that ensures lower energy consumption compared to traditional air conditioning systems, which translates to lower utility bills. This model also utilizes eco-friendly refrigerant, contributing to a reduced environmental impact while maintaining high performance.

The design of the Friedrich ZQ08A10C prioritizes portability and ease of use. Casters allow for effortless movement from one room to another, making it versatile for various settings. Additionally, the unit features a digital thermostat with a remote control, enabling users to set their desired temperature from a distance. The easy-to-read display provides clear information on temperature settings and operational modes.

Technologically, the ZQ08A10C includes multiple fan speeds and a programmable timer, enhancing user control over the cooling experience. The unit also features a dehumidification function, helping to remove excess moisture from the air, which is essential for maintaining comfort in humid environments.

Maintenance is simplified through the inclusion of a washable filter, promoting clean air circulation and extending the lifespan of the unit. Furthermore, the installation process is straightforward, often requiring no additional tools beyond those included in the packaging.

In summary, the Friedrich ZQ08A10C stands out for its robust cooling efficiency, user-friendly features, and portability. Its innovative technologies and durable performance make it a strong contender in the market of portable air conditioning solutions, suitable for a variety of spaces and settings.
Top Page Image Contents