Reversing switch action, Speed change

Reversing switch action

CAUTION

*Always check the direction of rotation before operation

*Use the reversing switch only after the tool comes to a complete stop Changing the direction of rotation before the tool stops may damage the tool

*When not operating the tool, always set the reversing switch lever to the neutral posi- tion

This tool has a reversing switch to change the direction of rotation Depress the

reversing switch lever from the A side forReversing switch lever clockwise rotation or from the B side for

counterclockwise rotation When the switch lever is in the neutral position, the switch trigger cannot be pulled

ClockwiseCounterclockwise

Speed change

- 1

I 1

To change the speed, first switch off the tool and then slide the speed change lever to the "11" side for high speed or " I " side for low speed Be sure that the speed change lever is set to the correct position before operation Use the right speed for your job

tLow speed

tHigh speed

-Speed change lever

CAUTION:

*Always set the speed change lever fully to the correct position. with the speed change lever positioned half-way between the " I " tool may be damaged.

If you operate the tool side and "11" side, the

*Donot use the speed change lever while the tool is running. The tool may be damaged.