Specific Safety Rules
1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
2.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4.Hold the tool firmly.
5.Keep hands away from rotating parts.
6.Do not leave the tool running. Operate the tool only when
7.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
| SYMBOLS |
The followings show the symbols used for tool. | |
v | .................................... volts |
| .................................... direct current |
n, | .................................... no load speed |
.../min | ................................... revolutions or reciprocation per minute |
b | .................................... number of blow |
5