alwaysbefollowedtoreducetherisk offire,electricshock,andpersonal injury,includingthefollowing:
Toreduceriskofinjury:
Beforeanyuse,besureeveryone usingthiselectricproductreadsand understandsallsafetyandoperation instructionscontainedthismanual.
Savetheseinstructionsandreview frequentlypriortouse.Storeinwalt chargerslot.
AVOIDDANGEROUS
ENVIRONMENTS and weather conditions when using this tool.
KEEP CHILDREN AWAY - All
visitors should be kept at a safe distance from work area.
STORE IDLE UNIT INDOORS - When not in use, the unit should be stored indoors in a dry location - out of reach of children.
DON'T FORCE THE TOOL - It will do the job better and with tess likelihood of a risk of injury at the rate for which it was designed.
USE RIGHT TOOL - Do not use the
tool for any job except that for which it is intended.
WARNING: KEEP HANDS AND ALL BODY PARTS AWAY from the blades. The blade edges are sharp and can
cause injury even when the toot is OFF.
DRESS PROPERLY - Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of gloves and substantial footwear is recommended when working out- doors. Wear protective hair covering to contain long hair.
DON'T OVERREACH - Maintain proper footing and balance at all times. Use both hands to operate unit safely.
USE SAFETY GLASSES - Always
wear proper eye protection, and use a face or dust mask if operation is dusty.
MAINTAIN UNIT WITH CARE - Keep the unit clean for best performance and to reduce the risk of injury. Follow instructions for service. Keep handles dry, clean, and free from oil and grease.
UNINTENTIONAL STARTING - Don't carry any tool while holding the switch area. The unit is shipped partly charged, and may start inadvertently if not handled properly.
CHECK DAMAGED PARTS - If any component of the system experiences a hard impact, check that no parts were damaged and verify that the unit operates properly. Check for misalignment or bending of moving parts, breakage of parts, and any other condition that may affect operation. A part that is damaged should be properly repaired or re- placed by an authorized service center.
STAY ALERT - Watch what you are doing. Use common sense. Do not operate the tool when you are tired.
DON'T GRASP THE EXPOSED CUTTING BLADES of the hedge trimmer or pole saw when picking up
or holding the unit. Do not attempt to remove cut material nor hold material
to be cut when blades are moving. Make sure the unit'sswitch is off and the battery pack is removed before clearing jammed material from blades. DON'T GRASP MOVING LINE of the line trimmer. Do not attempt to remove cut material or hold material to be cut when the line is moving. Make sure the unit's switch is off and the battery pack is removed before clearing or changing line.
ATTACH LINE GUARD ON LINE TRIMMER ATTACHMENT - Before use, attach the line guard correctly.