Campbell Hausfeld HL5402 operating instructions Description, Safety Guidelines, Unpacking

Page 1

Notes Notas

 

See Warranty on page 10 for important information about commercial use of this product.

 

 

 

 

HL5402

 

 

Operating Instructions and Parts List

HL5402

 

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Oil Lubricated Compressors

Description

This oil-lubricated compressor is designed for do-it-yourselfers with a variety of home and automotive jobs. These compressors power spray guns, impact wrenches and other tools. Compressed air from this unit will contain moisture. Install a water filter or air dryer if application requires dry air.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates

an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates

a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates

apotentially hazardous situation

which, if not avoided, MAY result in minor or moderate injury.

Notice indicates

important information, that if not followed, MAY cause damage to equipment.

Unpacking

After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service. In case of questions, damaged or missing parts, please call 1-800-543-6400 for customer assistance or call the nearest

DO NOT RETURN THE

STOP! PRODUCT TO THE RETAILER!

Record the Model No., Serial No. and date of purchase located on the base below the pump in the space below.

Model No. ____________________

Serial No. ____________________

Date of purchase _________________

Retain these numbers for future reference.

Authorized Service Center.

A listing of service center locations is enclosed. Have the serial number, model number, and parts list (with missing parts circled before calling.)

General Safety

Information

Do not operate

unit if damaged during shipping, handling or use. Damage may result in bursting and cause injury or property damage.

Since the air compressor and other components (filters, lubricators, hoses, etc.) used, make up a high pressure pumping system, the following safety precautions must be observed at all times:

Breathable Air Warning

This compressor/pump is not equipped and should not be used “as is” to supply breathing quality air. For any application of air for human consumption, the air compressor/pump will need to be fitted with suitable in-line safety and alarm equipment. This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR 1910. 134, and/or Canadian Standards Associations (CSA).

DISCLAIMER OF WARRANTIES

In the event the compressor is used for the purpose of breathing air application and proper in-line safety and alarm equipment is not simultaneously used, existing warranties shall be voided, and the manufacturer disclaims any liability whatsoever for any loss, personal injury or damage.

1. Read all manuals included with this product carefully. Be

MANUAL

thoroughly familiar with the controls and

the proper use of the equipment.

2.Follow all local electrical and safety codes as well as in the US, National Electrical Code (NEC) and Occupational Safety and Health Act (OSHA).

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

© 2007

IN620500AV 3/07

32

Image 1
Contents General Safety Information Safety GuidelinesDescription HL5402Oil Lubricated Compressors HL5402 InstallationOperation Before First START-UP BREAK-IN ProcedureCompresor lubricado con aceite HL5402 LubricationOil Lubricated Compressors HL5402 Operation MaintenanceGuía de diagnóstico de averías Continuación Storage Intake AIR Filter MaintenanceOverload Protector Section 28 SpSure compressor is run in a clean, well-ventilated area Oil Lubricated Compressors Troubleshooting ChartJuegos DE Piezas Para Mantenimiento 27 Sp44f 44d 44e 44c 44a 44b Compresor lubricado con aceite HL5402 Troubleshooting Chart26 Sp Funcionamiento Cambios DE AceiteContinuacíon Entrada DE AireMantenimiento Válvula de seguridad Asme Esta InstalaciónTubería de descarga Esta tubería Tierra Válvula de chequeo -Esta válvulaGénéralités sur la Sécurité Directives de SécuritéCompresor lubricado con aceite DéballageDescripción Généralités sur la Sécurité SuiteMedidas de Seguridad Compresseur Graissé par l’HuileFonctionnement Installation SuiteCompresseur Graissé par l’Huile HL5402 Avant LE Premier Démarrage Procédure DE RodageEntretien Fonctionnement SuiteGuide De Dépannage Suite Compresseur Graissé par l’Huile HL5402 Guide de Dépannage Entretien Suite16 Fr 17 Fr Nécessaires D’ENTRETIEN