ADDITIONAL ACCESSORIES
MODEL NUMBER | DESCRIPTION |
| PHOTO | |
| SLEEVE EXTENSION RETROFIT KIT |
| ||
PXSE | steel, 2.4" sleeve extension attached to the room side of the |
| ||
sleeve to allow for the installation of a |
| |||
|
| |||
| PTAC in a |
| PXSE | |
|
|
| ||
| LATERAL DUCT ADAPTER Attaches to the PTAC/PTHP |
| ||
PDXDA | unit and provides a transition to direct up to 35% of the total |
| ||
CFM to a secondary room, either left or right of the unit. Kit |
| |||
| includes duct plenum with discharge grille and internal baffle, |
| ||
| adapter and end cap. |
|
| |
| LATERAL DUCT EXTENSION A three foot insulated |
| ||
PDXDE | plenum that attaches to the left or right side of the duct | PDXDA | ||
adapter. The extension can be cut to length by the installer. | ||||
|
| |||
| Maximum allowable straight extension is fifteen feet. |
| ||
PXDL | CONTROL DOOR LOCK KIT Locks control door to |
| ||
prevent tampering by unauthorized users |
| |||
|
| |||
|
|
| PXDL | |
| REPLACEMENT FILTER PACK | These are original |
| |
PDXFT | equipment return air filters. They are reusable and can be |
| ||
cleaned by vacuuming, washing, or blowing out, and are sold |
| |||
|
| |||
| in convenient ten packs. (Two filters per chassis) |
| ||
|
|
| PDXFT | |
| CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit |
| ||
PXCJ | with junction box for 208/230V and 256V units (subbase not |
| ||
required). Kit includes a means of quick disconnect for easy |
| |||
|
| |||
| removal of the chassis. *Required for 265V installations. | PXCJ | ||
|
|
| ||
PXPC | POWER CORD RETROFIT Replaces LCDI power cord on 230V |
| ||
models when unit is used with a subbase. PXPC15 is used with |
| |||
15/20/30 | 15 amp 2.5 kW units. PXPC20 is used with 20 amp 3.4 kW |
| ||
| units. PXPC30 is used with 30 amp 5.0 kW units. |
| ||
|
|
| PXPC30 | |
Mad | ein |
|
|
FR | US | ||
4548 |
| ||
| 321 | A | |
CHASSIS OPTIONS
DESIGNATOR | DESCRIPTION |
SSTANDARD UNIT Standard PTAC/PTHP chassis. Can be 230/208V or 265V, electric or heat pump.
SEACOAST PROTECTION Additional protection for PTAC/PTHP units in a coastal or corrosive
Cenvironment. The entire outdoor coil is submerged in a specially formulated enamel coating, then oven- cured for a tough,
26