Baldor MN806 manual Size General Ramp NON UL Purpose UP/DOWN Multipurpose

K Control Transformers

Control Transformers are locally available. Baldor stocks simular transformers byt may require panel modification to fit.

L Bypass Contactors

The bypass used for G and R controls have varied during the years. Currently Baldor is using ASEA or ABB contactors which were used for several years of production of the G, R and M controls. The ASEA/ABB contactors are normally stocked by Baldor. If the contactor is not a ASEA/ABB Baldor does not stock replacements. A replacement should be found locally.

Cross Over Chart

To convert an Old Style General Purpose, Ramp Up/Down, or Non UL Style Multipurpose, use the chart below. The last digits remain the same. The Multipurpose Soft Starter will be in a larger enclosure than the old control.

SIZE	GENERAL	RAMP	NON UL	UL
	PURPOSE	UP/DOWN	MULTIPURPOSE	MULTIPURPOSE
0	G70**	R70**	MA7A**	MA7-008-**
1	G71**	R71**	MA7B**	MA7-016-**
2	G72**	R72**	MA7C**	MA7-030-**
3	G73**	R73**	MA7D**	MB7-055-**
			MB7E**	MB7-080-**
4	G74**	R74**	MB7F**	MB7-160-**
5	G75**	R75**	MB7G**	MB7-250-**
6	G76**	R76**	MB7H**	MB7-420-**
7	G77**	R77**	MB7J**	MB7-840-**

** These digits remain the same.
Example #1:	Example #2:
General Purpose	Non UL
Starter G76AB is	Multipurpose Starter
now MB7-420-AB.	MA7BAP is now
	MA7-016-AP.

G-5