ACTiSYS CAM-6500 user manual Dome ID Setting, Dome Control Protocol

Page 13

	Pin 4	Line Lock
	Pin 5	System Initialization (for
		upgrade)
	Pin 6	Reserved

RS-232 is reserved for internal use only; The Pin 3 and Pin 4, they are used for termination and Link Lock adjustment respectively. The Pin 5 is mainly used for return to factory default of camera setting.

3.Dome ID Setting

Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the speed dome ID is 123, the ID switch should be set as below:

centesimal

decimal

single digit

NOTE: No two speed domes should be given the same ID, or communication conflict may occur.

NOTE: The number “0” should locate upwards as shown in

dabove diagram for correct switch definition.

o

4.Dome Control Protocol

Protocol is a specific set of rules, procdures used for data communications. Basing on the protocol of your management software that you are going to use. Use the switch to set your dome control protocol and the baud rate. Refer to table below and turn the arrow to choose a protocol for your speed dome.

Switch No.

Protocol

01Pelco D

02Pelco P

07DSCP

11Pelco D

12Pelco D

13Pelco P

Baud Rate

2400

4800

9600

4800

9600

2400

8

Image 13

Contents Hardware User’s Manual Trademarks CopyrightLiability FCC/CE Regulation Table of Contents Page Introduction Precise and Accurate Tracking Day/Night FeaturesQoS Enabled Video Streaming Perfect Contrast Solution for High Image QualityLow-Light Application Privacy Mask for Privacy ProtectionDynamic Dome Configuration Bundle Powerful Surveillance SoftwareDdns Supported Build-in Hardware Motion DetectionDon’t open the housing of the product Cleaning Don’t use the power supply with other voltagesDamage Requiring service AttachmentsSafety Check Communication Switch Setting Reset ButtonDome Control Protocol Dome ID SettingPin Connector Pin Connector for LAN/WANMounting the IP High Speed Dome Basic Connections Surface Ceiling Mount Optional AccessoriesIn-Ceiling Mount Transparent Cover/Smoke Cover Ceiling PanelIndoor Mount Kit Straight Tube Gooseneck TubeCorner Standard Mounting Plate Pole Wide Direct Mounting Pole Thin Direct MountingCorner Wide Box Corner Thin BoxPole Wide Box Pole Thin BoxWall Box Mounting Stainless Strap Cutter Stainless Steel StrapsRepeater/Converter Power Box Connector Box Indoor ApplicationPower Adapter Ceiling Mount Items Needed Surface Ceiling MountingTools Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting Step In-ceiling MountingPut up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mounting with Gooseneck Tble Wall MountWall Box Mounting Corner Standard Mounting Plate Corner MountCorner Thin/Wide Box Mounting Pole Thin/Wide Direct Mounting Pole MountPole Thin/Wide Box Mounting OSD Display Format OSD Setup Menu¾ 18x Model Camera Backlight Home Cruise Schedule ¾ 22x Model / 23x ModelManual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Backlight Default Camera¾ 18x Model Auto FocusManual ¾ 22x Model / 23x Model AutoAperture AE ModeAuto Shutter BrightGain IrisAGC WBC ModeIndoor ATW OutdoorID Display OFF Setup Menu18x Model 22x Model / 23x ModelZoom Speed ImageSpeed by Zoom Digital Zoom Auto CalibrationSlow Shutter Reset Angle AdjusterSetup MENU2 18x Model Only ¾ 23x ModelFirst Mask DisplayLast Title DisplayTitle ABC Title SettingAlarm PIN Alarm SettingAlarm Switch Alarm TypePreset Alarm ActionHome Setting SequenceHome Function Select ModeReturn Time Seqence Preset PositionSequence Line Sequence PointDwell Time RUN Sequence Start Point Autopan LineEND Point DirectionRUN Autopan Record END Record StartRUN Cruise IR Function Removable IR CutDetect Switch Alarm Detect 18x Model OnlyThreshold IR ColourINT. Focus Detect ModeFIX Focus INT. AEWDR Function WDR SwitchPrivacy Transparency Privacy SwitchColour SET MaskShade Size 00 ~CENTER000 ~ Mask CLEAR+RESETSIZE000 ~ Time Display Time FunctionYear / Month / DAY Hour / MinuteSchedule Mode Schedule SwitchSchedule Point Schedule Hour / Minute