18x MODEL |
| 22x MODEL/23x MODEL | |
MAIN PAGE 1 |
| MAIN PAGE 1 |
|
DEFAULT CAMERA | OFF | DEFAULT CAMERA | OFF |
BACKLIGHT | OFF | BACKLIGHT | OFF |
FOCUS | AUTO | FOCUS | AUTO |
AE MODE | AUTO | APERTURE | AUTO |
WBC MODE | AUTO | AE MODE | AUTO |
ID DISPLAY | ON | WBC MODE | AUTO |
SETUP MENU1 |
| ID DISPLAY | ON |
SETUP MENU2 |
| SETUP MENU | ENTER |
B-3-1 DEFAULT CAMERA
The “DEFAULT CAMERA” is used to restore the camera settings (e.g. Backlight/Focus/AE//WBC/Aperture). Once any one of the items is modified, the setting will become <OFF> automatically. Select <ON> for this item to recall the mentioned camera parameters.
NOTE: On 18x MODEL, the Aperture function is provided in “SETUP MENU2”, instead of “DEFAULT CAMERA”.
B-3-2 BACKLIGHT
The Backlight compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object.
¾18x MODEL
Turn this item <ON>; the center object will be brightened in contrast to the edge of the picture (where a backlight would most likely be located).
¾22x MODEL / 23x MODEL
The Backlight Compensation Level ranges from 000 to 100.
| BLC LEVEL |
LEVEL | 20 |
EXIT | YES |
NOTE: If this function is enabled, the WDR function (for 23x MODEL only) will be disabled automatically. For details, refer to section
43